JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

picture setting codes for Panasonic 47wx49 RPTV

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
felthove



Joined: 05 Jan 2004
Posts: 4

PostPosted: Wed Jan 07, 2004 12:50 pm    Post subject: picture setting codes for Panasonic 47wx49 RPTV Reply with quote

I have a RS 15-2117 and I am learning how to use JP1.

My goal is to be able to program a macro to change the picture settings for color, contrast, and brightness on my 47wx49 TV.

Does anyone know the discrete codes for these settings?

I found the following advanced codes for a Panasonic TV on this site, but when I manually (I'm still not using a JP1 interface, that is) programmed the codes listed for picture settings into my remote and tried to use them on my TV nothing happened. Any ideas? I even tried pulling up the picture menu with my remote first and then using the buttons but I couldn't get a response from the codes (167, 168,169, etc) regardless of what I did. Thanks!

http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0250



TV/0250 ------------------ <TV Group> Panasonic
----------------------------------------------------------------------
***** WARNING: 018 = RESET, DON'T try this code under any circumstances, it will reset all of the factory programmed settings!!!!!


027 -/-- 195 Browse Up 052 N 106 PIP Up
252 100 023 C 041 N 055 PNR
247 11 000 C.C. 155 Nicam 065 Record
251 12 108 Cancel 053 Nicam 133 Red
027 >=10 169 Color Down 052 Normal 186 S
186 A 165 Color Up 059 On Time 041 Set
010 AI 171 Contrast Dow 182 P 254 Skip
153 Ambience 167 Contrast Up 188 Page Down 105 Sound Menu
057 Analog Down 189 Day Down 192 Page Up 153 Spacial Snd
053 Analog Up 193 Day Up 200 PIP Channel 155 Stereo/Mono
201 Auto Channel 076 DVD/TV 201 PIP Channel 153 Surround
072 AV 078 FM/TV 196 PIP Channel 190 Theme
214 Balance Left 010 Fuzzy 229 PIP Down 105 Tone
218 Balance Righ 137 Green 233 PIP Left 216 Treble Down
219 Bass Down 194 Guide 102 PIP Mode 212 Treble Up
215 Bass Up 092 Help 232 PIP On/Off 181 TV
155 Bilingual 155 I/II 231 PIP Right 182 V
139 Blue 061 List 021 PIP Search 185 Video 1
168 Bright Down 155 Mode 235 PIP Size 183 Video 2
164 Bright Up 155 Multi Sound 102 Pip Source 187 Video 3
191 Browse Down 105 Music Speech 203 Pip Still 135 Yellow
Back to top
View user's profile Send private message
Paul Hives



Joined: 06 Jan 2004
Posts: 11

PostPosted: Wed Jan 07, 2004 1:19 pm    Post subject: Reply with quote

Have you tried the pushbutton method to see if the codes work.

Press the P key followed by the 3 digit EFC.
Back to top
View user's profile Send private message
felthove



Joined: 05 Jan 2004
Posts: 4

PostPosted: Wed Jan 07, 2004 1:25 pm    Post subject: Reply with quote

Yes, that is the method I used (sorry for saying I "programmed them"). No response from the set. I tried pushed them in while watching TV, while already in the "picture menu", and while I had already selected a picture category to change (say, "color") and still got no response.
Back to top
View user's profile Send private message
Paul Hives



Joined: 06 Jan 2004
Posts: 11

PostPosted: Wed Jan 07, 2004 1:29 pm    Post subject: Reply with quote

Try other EFC's just to see if the method works..I've used discrete codes for Pannys with great success. Make sure you select the TV device button first.
Back to top
View user's profile Send private message
Oinge



Joined: 19 Sep 2003
Posts: 34

PostPosted: Sat Jan 10, 2004 12:39 pm    Post subject: Reply with quote

Quote:
TV/0250 ------------------ <TV Group> Panasonic
----------------------------------------------------------------------
***** WARNING: 018 = RESET, DON'T try this code under any circumstances, it will reset all of the factory programmed settings!!!!!


I have a Panasonic TV and I entered P018 as I was searching for codes. A message came up that required acknowledgement to continue. I backed out and no harm was done.

I have seen this Printed warning several times and it makes me think that the settings will be reset as soon as the TV gets the command. That wasn't my experience. Does this really happen on some models or older Panasonics? I am just curious and you guys have all the answers.
Back to top
View user's profile Send private message
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3006
Location: Connecticut, USA

PostPosted: Sat Jan 10, 2004 3:32 pm    Post subject: Reply with quote

Oinge wrote:
Does this really happen on some models or older Panasonics?

I don't know about Panasonic specifically, but it has been reported on some other models IIRC.


Quote:
you guys have all the answers

And we won't ask you if you need any batteries! Wink
_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central