philips dvdr 3400/37

[Buzywoman]

1. Device: philips dvdr 3400/37
2. Type of device: DVD recorder
3. Year: june 2006
4. JP1/UEI Remote model: URC-10820
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? no
10. Learning remote question? n/a

hello,good morning.

i have a philips dvdr 3400 dvd recorder abd not have the remote.
y have jp1x and urc 10820 remote.
but tested all upgrade code on dvd section on forum and doesn work.

tanks
buzywoman

[The Robman]

We have an exact match to your recorder in the file section, are you sure that you tried this file and it didn't work?

http://www.hifi-remote.com/forums/dload ... le_id=3885

[Buzywoman]

hello robman ,y have tested this upgrade code but not work on urc-10820 this primary made for rs 15-1994 y have converted with remote master for 10820 and not working.

????

in the past y have used remote master for convert remote model and no problem.

[The Robman]

It doesn't matter which remote the upgrade was originally created for. Just to eliminate the chance of user error, you should load a copy of your IR file (with the upgrade present) into the file section (and then post a link to it here) so we can check it.

[Buzywoman]

hello y have posted my ir file tanks

deleted url

[Capn Trips]

I don't know what upgrade you are using, but it's not the one for your device. Although it calls for the correct protocol (0058), you have the wrong fixed data ("80 30" vice "95 30 5A 55") and by inspection the hex commands in your IR file's upgrade do not match those in the upgrade. You should do it again, and if it still doesn't work, then upload your upgrade file and provide a link.

[Buzywoman]

hello capn trips

y have use this (if probably for URC-6131http://www.hifi-remote.com/forums/dload ... le_id=3885 and opened with remote master for convert and saved in urc-10820 form.

after y have copied ugrade code in upgrade device on urc-10820

[vickyg2003]

I don't have the JP1 tools here, but from reading the txt file, it appears that this upgrade uses a custom protocol that has not been translated for the processor in the 10820.

Didn't this give an ERROR Protocol can not be translated?

[Capn Trips]

We KNOW the source file. I suggested that you upload YOUR MODIFED upgrade file for someone to see where you made an error.

This upgrade is for a URC-6131 (not RS 15-1994), and does NOT translate into the upgrade you have in IR. You have made a mistake somewhere. Open that linked file in RM (you will have to change the "Files of Type" selection in the "Open" dialog box to "KeyMapMaster device upgrade files"). Then change the remote to your remote and reassign the buttons as you desire. The upgrade will be different than what you have in IR right now.

[Capn Trips]

Are we looking at the same file? When I download and open the file, the top section reads:

Code: Select all

Name:,Philips DVD Recorder DVDR-3400/37,,,,v9.03,,,,,,,CURRENT DATA
Devices:,RC-6,48,,,,,,,,,,
Manual:,,0 = 1-byte,LSB-COMP,88,NO,,,,,,,
Setup:,2034,99 = URC-6131 PVR,16 - PVR,OBC,USE,80 30,1,Yes,,,,
URC-6131 PVR Device Upgrade/Key Move Code:,,,,,,,,,,,,
Upgrade Code 0 = 27 F2 (PVR/2034) Philips DVD Recorder DVDR-3400/37 (KM v9.03),,,,,,,,,,,,
58 16 3E FE FE FE B9 80 30 1E 1F 0C 2C 2C 29 28 31 37 EE 0F D1 42 58 59 5A 5B C8 5C 83 4B FA 20 21 CF 4E F7 82 1D 7E 41,,,,,,,,,,,,
KeyMoves,,,,,,,,,,,,
 2F F3 27 F2 89«VCR Plus: VCR Plus» ¦30 F3 27 F2 FE«Timer: Timer» ¦90 F3 27 F2 94«Recording mode: Recording mode» ,,,,,,,,,,,,
End,,,,,,,,,,,,
Protocol Code:,,,,,,,,,,,,
Upgrade Protocol 0 = 00 58 (S3C8+) RC-6 (KM v9.03),,,,,,,,,,,,
35 A5 21 8B 13 CE 05 08 08 00 DE 00 00 00 00 00 CC D0 52 05 35 01 A8 04 4C 03 C7 34 B0 C5 B0 C6 0C 04 1C 55 2C C0 90 C3 FB 02 B2 12 E0 C2 E0 C2 0A F4 0C 06 02 05 5E D7 01 60 C6 EB E3 A6 C5 06 6B 05 4E C7 34 8B D7 E6 07 C0 76 00 01 EB 03 E6 07 30 E6 10 05 E6 11 04 E6 01 03 8D 01 46,,,,,,,,,,,,
End,,,,,,,,,,,,

This opens in RM and KM as a standard URC-6131 file using the RC6 protocol. Am I missing something?

[Buzywoman]

yes y have opened the same file with remote master and saved for urc-10820 .

but if it not compatible y doesnt have a 6131 pvr remote.

trying to find original remote on ebay and learning all for monting my own upgrade code with remote master.

tanks

ps sory for my english,because my first is french,my english is very basic.

[Capn Trips]

You do not require a 6131. The existing upgrade is for the 6131. You open it in RM or KM and CHANGE the remote to YOUR remote. I have done this and it works fine. Here is the upgrade.

Code: Select all

Upgrade Code 0 = 47 F2 (PVR/2034) Philips DVD Recorder DVDR-3400/37 (RM v1.86)
 58 00 FE FE FC EE C1 95 30 5A 55 03 04 05 06 07
 08 09 0C 0F 1D 01 02 00 21 28 1E 41 42 37 31 41
 4B FA 5B 5C 7E 82 58 83 5A 1F EE 20 C8 DF 94 59
 DE 3F CF
KeyMoves
 90 F0 04 47 F2 D1 84«Recording mode: Recording mode»¦
 02 F0 04 47 F2 94 6E«Setup: Setup»¦
End

Unfortunately, I cannot assign the buttons as YOU would like them, so it may not be the way you would prefer.

[The Robman]

You obviously copied the upgrade from KM (or RM) without first changing the remote from the URC-6131 to the URC-8820.

I changed the remote and re-arranged some of the buttons for you, and then replaced your file.

http://www.hifi-remote.com/forums/dload ... le_id=5924

[Buzywoman]

very tanks the robman and Capn Trips

testing this file on afternoon and sent news.

with the code of Capn Trips work partialy just swap button all inverted.

but y have observed error on my program my rdf files is bad because on past month the multiple flies on my pc as corupted , y have search and seach and y have downloaded and replaced my rdf folder and worked fixed data as changed just only on replacement rdf files.

tanks

buzywoman

[vickyg2003]

with the code of Capn Trips work partialy just swap button all inverted.

In the GENERAL TAB make sure the KEYMAP = STANDARD, or the functions will be on the wrong buttons.