Thomson IR code

fis2000 · Post by **fis2000** » Sat Aug 25, 2007 3:20 am

Could you please post here a link to or send me the IR code for the THOMSON DCI-1000?
I red somewhere that this code is C2009 (is it?...).
I've been looking a lot for it but with no success...

Thank you.

Capn Trips · Post by **Capn Trips** » Sat Aug 25, 2007 4:22 am

READ BEFORE POSTING or your post will be DELETED!

fis2000 · Post by **fis2000** » Sat Aug 25, 2007 4:30 am

1. Device: THOMSON DCI-1000
2. Type of device: Cable Box
3. Year: 2004
4. JP1/UEI Remote model: URC-39720
5. Do you have a JP1 cable? No
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a

Capn Trips · Post by **Capn Trips** » Sat Aug 25, 2007 5:50 am

Well, there is a Thomson Cable box upgrade in the file section, but of course you have no way of upoading it to your remote. It uses the Thomson protocol and Device 3, which is not present in ANY remote.

You need a cable and then you can modify that upgrade and upload it to your remote.

fis2000 · Post by **fis2000** » Sat Aug 25, 2007 7:29 am

I'm not sure I follow what you really mean...
What I actually need is a BIN file to place in the SBAV folder of SlingPlayer (I'm using SlinkBox), so I can uplaod the matching IR code into the software (By writing the code number, C2009 probably, in the "other" code field).
Can the file you linked help me? If yes, How?

Capn Trips · Post by **Capn Trips** » Sat Aug 25, 2007 7:55 am

fis2000 wrote:I'm not sure I follow what you really mean...
What I actually need is a BIN file to place in the SBAV folder of SlingPlayer (I'm using SlinkBox), so I can uplaod the matching IR code into the software (into the "other" code field).
Can the file you linked help me? If yes, How?

Well, if you read your previous posts, you might notice that you have not once mentioned Slingbox, so I presumed you wanted your URC-39720 remote (Force right?) to control the Thomson box.

As for creating a BIN, you need to go to the Slingbox forum and read the sticky post there about creating BIN files for Slingbox, but you would need to start with the file I linked for you, and use the free software program RemoteMaster (see the software forum) to convert it to a BIN.

fis2000 · Post by **fis2000** » Sat Aug 25, 2007 3:20 pm

I succedded making the BIN file and everything works!
Thanks a lot.