Hifi-Remote.Com - JP1 remotes and cables for sale

clthoma2 · Post by **clthoma2** » Thu Jun 07, 2007 11:32 am

Robman,

If I bought a URC-9910, is it pretty simple to modify it with a 3/32" (2.5mm) to 1/8" (3.5mm) plug to except different IR flashers/emitters. I would like to get a triple emitter that would allow me to control my receiver, dvd player, and cable box. The reason that I want to do this is because I have a pretty small cabinet and I don't have room to place the RF/IR receiver thing in front of them?

Does this remote distinguish between what it sends out throught the flasher/emitter or does it send all of the commands that come in out through the emitter as well?

If I buy a 3/32 (2.5mm) to 1/8 (3.5mm) adapter, does it matter if it is mono or stereo? I wouldn't think so but I just wanted to check.

Thanks,

Post by **The Robman** » Thu Jun 07, 2007 1:31 pm

The changing of the plug isn't the issue, the problem with the URC-9910's internal circuitry is that it's set up in such a way that it only supports one IR blaster. However, there is a minor modification that can be made to the command center that will let it support up to 4 IR blasters. I've bought the parts to try out this mod myself, but haven't got around to it yet.

You can read up on it here...
http://www.hifi-remote.com/forums/dload ... le_id=1362

mjg100 · Post by **mjg100** » Sun Jun 10, 2007 7:26 am

Rob, You sent me a link to this site from remotecentral.com. I am currently using a Sony RM-AV3000 remote and programming discrete codes into it with a Radio Shack 15-2142 so this is all new to me. I am interested in a JP1 RF remote and cable. I see that you sell the 9910. Does it come with the RF or is that extra? I use a MAC computer so I would need the USB cable. I do not have a serial port on the MAC. Is this the remote that you would recommend? Is programming this remote harder to do using a MAC and the USB cable?

Capn Trips · Post by **Capn Trips** » Sun Jun 10, 2007 8:39 am

I can help you with most of your questions:

(1) The 9910 is a fine remote. Very well supported by the tools here and has a very good extender (software extender - not the RF extender referred to below - read about extenders HERE) as well, if you want to really stretch its limits;
(2) The RF extender is part of the package, not an extra add-on;
(3) As far as the Mac, all of the software tools here are written for PCs, but some work in virtual Windows environments on Macs. I'm not an expert on Macs, but THIS THREAD seems to point a way ahead to using the software reliably on a Mac.

classicsat · Post by **classicsat** » Sun Jun 10, 2007 11:54 am

FWIW, the 9910 RF system would relay the same signal out locally and out the blaster(s) connected to the remote base. Unless you want to build a smart relay.

mjg100 · Post by **mjg100** » Sun Jun 10, 2007 1:11 pm

Thanks. If you were looking at a RF remote the 9910 the one that you guys would look at?

Post by **The Robman** » Sun Jun 10, 2007 7:05 pm

There's only the URC-9910 and the URC-9964 Kameleon to chose from, so yes, go with the 9910.

bruceas · Post by **bruceas** » Tue Jun 12, 2007 1:56 am

My old 7560 is broken. I need a new remote. Is the 8910 the best remote compatible with my Jp1 simple interface you sell?

Is 8910 disponible? Can you send to italy?

Thanks

Post by **The Robman** » Tue Jun 12, 2007 6:25 am

The 8910 is probably your best option, and yes, I can send to Italy.

bruceas · Post by **bruceas** » Tue Jun 12, 2007 7:14 am

The Robman wrote:The 8910 is probably your best option, and yes, I can send to Italy.

I will pay:

8910 19$
Shipping Charges 11$
Paypal CC surcharge 2$

Total 32$
Is it OK?
If i buy 2 URC8910 i will pay 51.5$ ?
How many time to delivery?

Thanks

bpsherwo · Post by **bpsherwo** » Thu Jul 12, 2007 8:30 pm

1. Do you have a photo of the JP1 USB Cable you offer for sale?
2. Are people using them successfully with Vista?

Post by **The Robman** » Thu Jul 12, 2007 9:00 pm

bpsherwo wrote:1. Do you have a photo of the JP1 USB Cable you offer for sale?
2. Are people using them successfully with Vista?

Sure, here it is (I get them from DIYGADGET)

For Vista info, read this...
http://www.hifi-remote.com/forums/viewtopic.php?t=8456

BigQ · Post by **BigQ** » Mon Jul 16, 2007 3:32 am

The Robman
Hello,I am live in china,I went to buy your jp1 remote,but i dont know how to do.pls let me know how to buy..payment and shipment info, thanks.my email address:bigq@mail2web.com

Post by **The Robman** » Mon Jul 16, 2007 6:17 am

BigQ wrote:The Robman
Hello,I am live in china,I went to buy your jp1 remote,but i dont know how to do.pls let me know how to buy..payment and shipment info, thanks.my email address:bigq@mail2web.com

All you need to do is read the first post in this thread as I have detailed everything there.

rindertp · Post by **rindertp** » Mon Jul 30, 2007 2:31 am

Hallo Rob,

I would like to know the shipping costs to the Netherlands for ordering one URC 8910 and one URC9960. Did I untherstand it wel and will it be 2 times $11, or can it be $11 in one package.

Greetings

Rindert

JP1 Remotes

Hifi-Remote.Com - JP1 remotes and cables for sale

URC-9910

Interested in getting into JP1

extender

Photo of USB Cable

Re: Photo of USB Cable

Hello,

Re: Hello,

Shipping costs