JP1 Remotes

[wkeith]

I have just upgraded from Sky and Sky + to Sky HD and Sky +

I have a number of TV's connected to them with IR eyes installed to permit us to control the boxes remotely. I have an OFA 7562 which I programmed with learned keystrokes to make it work better than the provided SKY and SKY + device codes.

This stopped working for two reasons when HD was installed
1) - the HD box will respond to both a SKY + or SKY HD controller.
2) - The 7562 did not have anough capacity to learn all the keystokes I wanted for both HD and Sky +

I solved the first by using an IR eye which will accept the signal from a SKY control and convert it to a SKY + signal, but I still had the problem of the 7562 not reponding as I wanted.

http://www.letsautomate.com/12261.cfm?CFID=294310

I then discovered JP1! With ir.exe and Remotemaster I have been able to create upgrades for SKY HD and SKY + (behaving as a SKY + remote)using my preferred layout, and there is still space for more learned keystrokes if I want. Thank you!

I will upload my upgrade files.