problem KM-RM

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 2:37 pm

ok ..
i currently only have RM as open office does not work with KM

i programed 90% of my tivo -2 buttons into my rs15-2104 , but i have run out of memory for learned codes.

now i can fire up the ir program , download all the stuff off the remote ( usb ) and see all the hex codes etc. ... i have the tivo rm file and i have loaded it up into the rm program .. then i spent some time setting up everything like i wanted it , copied the block into the ir.exe program , set up a device and uploaded it to my remote.

here is where it gives me problems.

nothing i get from remotemaster seems to work when i move it to ir.exe .. it's their and it looks like it is all setup ( even the hex codeds match for the correct button ) , but once on the remote , it doesnt work.

i'm really starting to think their is a protacal problem , but i'm stuck at how to figure it out.

if anyone is willing to look at my files let me know and i'll stick em somewhere.

johnsfine · Post by **johnsfine** » Mon Apr 23, 2007 2:46 pm

lucindrea wrote:see all the hex codes etc. ... i have the tivo rm file and i have loaded it up into the rm program .. then i spent some time setting up everything like i wanted it , copied the block into the ir.exe program , set up a device and uploaded it to my remote.

Did you remember to delete the learned signal (or use a different device mode) to the learned signals don't interfere with testing the upgrade?

lucindrea wrote: if anyone is willing to look at my files let me know and i'll stick em somewhere.

That's why we have a diagnosis area

Be sure to post the URL for your file(s) back to the thread after you put them there.

It sounds like we would need three files to diagnose what went wrong:
1) A .ir file containg the learned signals.
2) A .ir file matching what you uploaded to the remote to test the upgrade.
3) A .rmdu file containing the upgrade.

(I prefer a .zip containing related files. But seperate URLs is also OK. Don't use archiving/compression format other than .zip. Many experts here only have programs to support .zip).

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 3:27 pm

ok i ziped up the files
http://www.hifi-remote.com/forums/dload ... le_id=4493

johnsfine · Post by **johnsfine** » Mon Apr 23, 2007 3:46 pm

In the Output panel of RM it says

Upgrade Protocol Code *** REQUIRED ***

in red. That means you need to install the protocol upgrade as well as the device upgrade. You didn't.

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 3:53 pm

thought i did paste that into the protocol area

it's their protocol: $0111

a driect d/l from the reomte

http://www.lucindrea.com/rs.html

Mark Pierson · Post by **Mark Pierson** » Mon Apr 23, 2007 4:26 pm

In the Tivo.rmdu file, there is no Device or Sub-Device specified. The learned signals in good now - sound and tivo - rs.ir show Dev=133 and Sub-Dev=48.

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 4:47 pm

tried adding them , didnt help
i never put them in because if you hold your mouse ovet the box is says default = 133 and 48

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 4:49 pm

i went back and looked .. the learned codeds do show that , and i did add the device and sub in rm .. but once in ir from rom , their is no corasponding device sub device that i can see .

Evan_s · Post by **Evan_s** » Mon Apr 23, 2007 5:39 pm

The Device and subdevice codes are part of the device upgrade. If you haven't already you just need to copy the device upgrade from RM into IR again. You don't need to set it in IR.

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 6:13 pm

yep , did copy it when i added them into rm .. no luck ;(

Evan_s · Post by **Evan_s** » Mon Apr 23, 2007 6:17 pm

have you reuploaded your IR file since updating the device upgrade yet?

Post by **ElizabethD** » Mon Apr 23, 2007 7:17 pm

Lucindrea, are you saying nothing works?
I see one small discrepancy - on the keymoves tab in IR, there are keymoves for VCR/0618. Three of those are one byte long, two, from RM, are 2-byte long as they should be. Whether any of the other stuff is correct I can't tell as I don't have TiVo.

johnsfine · Post by **johnsfine** » Mon Apr 23, 2007 8:48 pm

lucindrea wrote:thought i did paste that into the protocol area

Sorry. I don't know what I did wrong in IR.exe while checking your file the first time. But I rechecked and you're right.

Now it looks to me like the protocols.ini entry for "TiVo (Official 2-byte)" must be wrong. I expect most people use one of the other TiVo choices. Try that.

I'll try to find time later to check/correct the "TiVo (Official 2-byte)" entry in protocols.ini

lucindrea · Post by **lucindrea** » Mon Apr 23, 2007 10:35 pm

ok tried a differnt protocol and it works , the maping is off but i think i just did some of the buttons wrong .. good news it that it's talking to the tivo now

this works

Upgrade protocol 0 = 00 41 (S3C80) TiVo (Advanced) (RM v1.77)
43 8D 31 8B 12 CF 44 08 08 01 1A 01 06 01 1A 03
31 D7 42 11 A7 08 B7 08 05 E4 06 05 60 06 46 06
F0 54 C0 06 F6 01 46 46 29 0D 8D 01 49
End

JP1 Remotes

problem KM-RM

problem KM-RM

Re: problem KM-RM

file