JP1 Remotes

jetskier · Joined: 09 Dec 2003 Posts: 287 Location: Nevada

I've been rambling on about this in the other threads. This question only applies until someone has the time to build an extender. It's hard to use these remotes in basic mode once you have used an extender in the JP1 remotes.

Is there a protocol I can load to change the execution speed of the macros in the x820 series remotes. I'd imagine there is a location in the memory/code somewhere where you can store a couple bytes that changes the execution speed of the macros. The hard part is finding that address.

jetskier · Joined: 09 Dec 2003 Posts: 287 Location: Nevada

A special thanks to Binky123 for preparing a protocol and upgrade for speeding up my macros!! They run as fast as the extenders do now.

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

Care to share?
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

LeapFroggie · Joined: 27 Oct 2006 Posts: 3 Location: Tampa Bay

I too would like to have the macro speed up code for the xx820 series remotes. I've looked through the Files section but didn't find it there.

Any chance that jetskier or Binky123 can help us out with this?

Dilligaf · Joined: 05 Aug 2003 Posts: 79 Location: Michigan

I found this file http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3536 that contains the device and protocol upgrade. Could someone explain how to use it ??? I haven't tried it yet.

Mike

jetskier · Joined: 09 Dec 2003 Posts: 287 Location: Nevada

I cleaned it up.....

You only need to load this upgrade once to flash the remote. It doesn't work like the traditional extenders. Once it's in, it permanent until you unload the flash by press CH- for both the macro speed and the device button macro initialization delay.

After you flash, you use your IR with no other changes.

Dilligaf · Joined: 05 Aug 2003 Posts: 79 Location: Michigan

Does this mean I can delete the upgrade after pressing CH+ and I will still have fast macros?? In other words can I load your IR File and initialize fast macros then restore my original IR file and keep fast macros ?

Mike

jetskier · Joined: 09 Dec 2003 Posts: 287 Location: Nevada

Yes. Do it for both device upgrades. Then it is done. Then load your file. The macro upgrade doesn't need to be in your setup.

The second TV, CH+ removes the 2 second delay on the device button macros. I've set it to the fastest without breaking the remote code.

Dilligaf · Joined: 05 Aug 2003 Posts: 79 Location: Michigan

Thanks, it works great. One other question, is it possible to use the built in long keypress functionality on keys other than the device keys ??

Mike

jetskier · Joined: 09 Dec 2003 Posts: 287 Location: Nevada