Any discrete power codes for Toshiba LCD TV

scottb721 · Post by **scottb721** » Sun Oct 15, 2006 1:59 am

Just getting back into the JP1 stuff after a couple of years.
Got myself a new TV and was hoping ON/OFF discrete codes were available. Input discretes would be nice to now that I think of it.
I plan to teach my 8811 so I can transfer it to my new Harmony 520.

1. Device: Toshiba 32WL66
2. Type of device:LCD TV
3. Year: 2006
4. UEI Remote model: URC8811
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes but couldn't find anything
8. Checked Pronto file section (at R/C)? yes but nothing listed for my model

I hope the answers were sufficient.

Anyone with any info ?
Thanks very much.

Capn Trips · Post by **Capn Trips** » Sun Oct 15, 2006 6:59 am

I am unaware of any discrete Power signals for any Toshiba TVs. They have been notorious for not having them. I don't know about these new LCD TV's but no traditional CRT Toshibas have discretes.

With th 8811 being a very-well supported remote, it has a very good extender, which you can use with the ToadTog Special Protocol to create discretes.

scottb721 · Post by **scottb721** » Sun Oct 15, 2006 5:30 pm

Thx Capn
Have found many ppl with Toshiba complaints. Oh well.

Will try to check the extender stuff and see what it can offer.

Cheers

scottb721 · Post by **scottb721** » Mon Oct 16, 2006 3:47 am

Well I found these codes. I've also printed the JP1 guides so will go thru those and find out where to stick it. See If I can get em into my 8811.

POWER ON - 0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

POWER OFF - 0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94

These came from RC forum http://www.remotecentral.com/cgi-bin/mb ... ight=loewe
Supposedly some new Toshibas have discretes.
Funny, I was actually trying to find discretes for my friends Loewe TV and found this Toshiba stuff.

Capn Trips · Post by **Capn Trips** » Mon Oct 16, 2006 6:16 am

7. Checked the file section? yes but couldn't find anything

Hmm...
This upgrade lists Discrete ON and OFF as EFCs 006 and 010 (OBCs 126 and 127), respectively.

Your codes decode to the same (NEC1 protocol, Device 64)

Have you tried those already?

scottb721 · Post by **scottb721** » Mon Oct 16, 2006 6:27 am

Sorry, I did see that initially but was thrown by the model numbers.
Will try to get those on my 8811 and see what happens.
You can delete this thread if u wish.

scottb721 · Post by **scottb721** » Mon Oct 16, 2006 9:44 am

Added the upgrade to my 8811.
Got volume and channel buttons to work (so I figured I was doing it right) but the buttons I assigned ON/OFF did nothing.

Can't win em all.