HD Tivo owners.... are you using 0618?

General JP1 chit-chat. Developing special protocols, decoding IR signals, etc. Also a place to discuss Tips, Tricks, and How-To's.

Moderator: Moderators

Post Reply
The Robman
Site Owner
Posts: 21892
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Thanks Greg. Did your testing include the 4 problem buttons listed above (ie, 9, clear, record and enter) ?
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

Yes. Those buttons work as well.
Top
binky123
Expert
Posts: 1292
Joined: Sat Feb 14, 2004 3:35 am

PB4.00 and Tivo 1byte (updated) protocol

Post by binky123 »

I took the PB file here mentioned in this thread and changed the processor to HCS08. I'm not exactly sure but the output doesn't look right. Is it the way I'm using PB? I wanted to try this protocol on a URC-10820 and an HR10-250 @ 6.3.
Top
MaskedMan
Tivo Expert
Posts: 1055
Joined: Tue Feb 10, 2004 3:54 am
Location: Boone, IA

Re: PB4.00 and Tivo 1byte (updated) protocol

Post by MaskedMan »

binky123 wrote:I took the PB file here mentioned in this thread and changed the processor to HCS08. I'm not exactly sure but the output doesn't look right. Is it the way I'm using PB? I wanted to try this protocol on a URC-10820 and an HR10-250 @ 6.3.
Do you know the 10820 has preset codes for tivo remote addresses 1-4? Codes are Address #1-SAT 1443 or PVR 0740. #2- SAT 1444 or PVR 0745, #3- SAT 1538 or PVR 1239, #4- SAT 1539 or PVR 1240.
Edmund
Top
Post Reply

Return to “JP1 - General Forum”