Convert Pronto Codes to program my URC-8811

[chinoverme1]

Hi:
I found this file on the Web to make my Sony DVD multi region. I have an URC-8811 and a JP1 cable.

How can I program my 8811 with this codes?

Thanks

Luis Verme

"This works with a Pronto remote, use ProntoEdit for the codes...

- Program individual hex-code (below) into five chosen buttons
- Put your DVD-player to standby mode (main power on and red light
above it)
- Push programmed buttons sequentially from one to five (the player
starts up)
- Do it again: Push programmed buttons sequentially from one to five
(the player goes back to standby)

The player should now be multiregion!

Here are the hex-codes:

Device Code: 26.73 Function: 127
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01AE

Device Code: 26.73 Function: 101-Angle
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6

Device Code: 26.73 Function: 85-Video Off
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6

Device Code: 26.73 Function: 95-SACD/CD
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01C6

Device Code: 26.73 Function: 21-Power Toggle
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 020E

[Capn Trips]

All of the info you need to make the upgrade is right there.

Create an upgrade using the Sony20 protocol, Device 26, subdevice 73. The "Functions" listed are the OBCs you enter in your KM/RM upgrade.

The rest of thyat stuff is what you would use in a Pronto remote, and the only thing we use Pronto hex for is to decode it, but the decode information is all there already.

[The Robman]

Better yet, use the ready made upgrade file in the file section (link at the top of every page)