Hifi-Remote.Com - JP1 remotes and cables for sale

Post by **The Robman** » Thu Jan 05, 2006 7:29 pm

All my prices are in the first post in this thread. As for whether the 9960 is a good choice for your devices, every JP1 remote can control any IR-controlled device, so the 9960 is as good a choice as any other JP1 remote.

new-guy · Post by **new-guy** » Fri Jan 06, 2006 3:26 pm

is the 6131 the only remote with PVR buttons?

How bad is the battery life on the kameleons?

lilbuzz · Post by **lilbuzz** » Fri Jan 06, 2006 4:04 pm

Rob,

I would like to buy a modified 9960, and a JP1 cable (parallel). Is there a link to purchase these?

Lilbuzz

Post by **The Robman** » Fri Jan 06, 2006 4:13 pm

lilbuzz wrote:I would like to buy a modified 9960, and a JP1 cable (parallel). Is there a link to purchase these?

I am temporarily out of JP1 cables, but I should be getting more in the next week or so.

To place an order, just send me the money thru Paypal and I'll get your remote out the next day. However, if you're planning on using a credit card, check with me first to get the correct surcharge amount.

new-guy wrote:is the 6131 the only remote with PVR buttons?

The Kameleons also have PVR buttons.

new-guy wrote:How bad is the battery life on the kameleons?

It's not good.

lilbuzz · Post by **lilbuzz** » Fri Jan 06, 2006 4:34 pm

Rob,

I will just order the 9960 for now.

Lilbuzz

hylor · Post by **hylor** » Mon Jan 09, 2006 3:32 pm

Do I need any adapters(pogo, etc...) for the 9960 or does your mod go all the way to the 6 pin connector?

Al

Post by **The Robman** » Mon Jan 09, 2006 5:00 pm

hylor wrote:Do I need any adapters(pogo, etc...) for the 9960 or does your mod go all the way to the 6 pin connector?

The only mod that I do to the URC-9960 is to solder in the 6-pin. If you buy a URC-9960 from me, you won't need to use any sort of adapter with it, you'll just need a JP1 cable.

dirkvictor · Post by **dirkvictor** » Fri Jan 20, 2006 3:00 pm

Rob,
Thanks for the remote (URC-8910). I got it in two days. Fast shipping and lowest price I could find. Now I just need to learn JP1.

Ken

airauto · Post by **airauto** » Sat Jan 21, 2006 11:28 am

Rob, I currently have 2 6131's. One from you and one I modified myself. Now I'm trying to decide between the 8910 or the 8811.
1) What does the remote chart mean by greater than 2k support. Do you need to change or add eproms to have more than 2k?
2) What is more advantageous modem upgrade or greater than 2k support?
3) Which has better battery life. I assume the 8811 since it doesn't have an LCD.

Thanks

d66 · Post by **d66** » Mon Jan 23, 2006 12:10 am

How much for parts to upgrade (eeprom & pins ) URC-6011 ?

Post by **The Robman** » Mon Jan 23, 2006 9:28 am

airauto wrote:1) What does the remote chart mean by greater than 2k support.

It tells you whether the remote supports EEPROM chips larger than 2k. For most remotes, 2k EEPROMs are the largest that they support.

airauto wrote:Do you need to change or add eproms to have more than 2k?

If you want a larger chip than the one that's currently in the remote then yes, you would need to replace it.

airauto wrote:2) What is more advantageous modem upgrade or greater than 2k support?

The two concepts are un-related. A JP1 user has no use for the modem, and you would need to be a JP1 user to make use of a larger EEPROM (in most cases).

airauto wrote:3) Which has better battery life. I assume the 8811 since it doesn't have an LCD.

I don't think the LCD has much effect on battery life.

d66 wrote:How much for parts to upgrade (eeprom & pins ) URC-6011 ?

I don't sell those parts, so check the mouser.com site for prices.

airauto · Post by **airauto** » Tue Jan 31, 2006 8:44 am

Rob, you have the 8910 arrow key version for sale. How many versions are there and what is meant by arrow key version? Thanks.

Capn Trips · Post by **Capn Trips** » Tue Jan 31, 2006 8:54 am

If you have the maps and images file for RemoteMaster support, just compare the URC-9910 jpg image with the URC-9910New jpg image.

(The 8910 and 9910 look exactly the same externally)

The "New" has individual buttons for the 4 arrow keys around the "select" button, whilst the "Old" has a tilting ring around the "select" button with all four arrow functions.

If you don't have those images, you can download them HERE.

neogeosnk · Post by **neogeosnk** » Thu Feb 02, 2006 2:20 pm

Will be paying for it via paypal credit card..
Have bought before.
Thanks Rob..

jbonham · Post by **jbonham** » Thu Feb 02, 2006 6:09 pm

Remember me?

You helped alot last week before I fried my remote because I obviously had lost some of my soldering skillz.

At any rate I am ready for a parrallel jp1 cable but not sure how this works. Should I just send the money via paypal and then you send the cable? Do I need to make some kind of formal request or did I just do that...?

Thanks

JP1 Remotes

Hifi-Remote.Com - JP1 remotes and cables for sale

URC-9960

Re: URC-9960

Parts for URC-6011

How much for for Modified URC-6131?