Question with adding a device

[pettinej]

I am using IR 6.15 and RM 1.15 and KM 8.35.

I down loaded the coolsat_4000_pro.txt loaded into KM piced my device URC-7800. I copied the upgrade code put in into IR on the devices tab and tested. My first observation is that the channel up down does not work.

IR says it is this.

Cable: 1554

# Key Name Hex Command EFC
1 0 8F 054
2 1 7F 185
3 2 BF 183
4 3 9F 182
5 4 DF 180
6 5 5F 184
7 6 1F 186
8 7 EF 053
9 8 AF 055
10 9 2F 059
11 VOL+ [Not Mapped] [Not Mapped]
12 VOL- [Not Mapped] [Not Mapped]
13 Mute [Not Mapped] [Not Mapped]
14 CH+ 87 246
15 CH- 4F 056
16 REW [Not Mapped] [Not Mapped]
17 PLAY [Not Mapped] [Not Mapped]
18 FF [Not Mapped] [Not Mapped]
19 PAUSE [Not Mapped] [Not Mapped]
20 STOP [Not Mapped] [Not Mapped]
21 REC [Not Mapped] [Not Mapped]
22 Power FF 181
23 Enter [Not Mapped] [Not Mapped]
24 PrevCh 1D 170
25 SLEEP 7D 169
26 TV/VCR CF 052
27 Menu F7 117
28 Surround [Not Mapped] [Not Mapped]
29 Sel[Select] B7 119
30 Display 67 249
31 Exit 77 121
32 PIP_ON/OFF [Not Mapped] [Not Mapped]
33 PIP_SWAP A7 247
34 PIP_MOVE 37 123
35 PROG/GUIDE E7 245
36 Up 57 120
37 Down 97 118
38 Left D7 116
39 Right 17 122

KM says this on the function tab

Functions EFC byte2 OBC ov Hex
num 0 054 014 8F
num 1 185 001 7F
num 2 183 002 BF
num 3 182 006 9F
num 4 180 004 DF
num 5 184 005 5F
num 6 186 007 1F
num 7 053 008 EF
num 8 055 010 AF
num 9 059 011 2F
(blue) 248 029 47
(yellow) 167 066 BD
mute 187 003 3F
page up 246 030 87
page down 056 013 4F
power 181 000 FF
menu 117 016 F7
guide 245 024 E7
info 249 025 67
exit 121 017 77
up arrow/ +ch 120 021 57
down arrow/ -ch 118 022 97
left arrow/ -vol 116 020 D7
right arrow/ +vol 122 023 17
ok 119 018 B7
sat 123 019 37
tv/radio 052 012 CF
recall 170 071 1D
audio 169 065 7D
pause 247 026 A7


Some keys are correct but others are not.



Next question is that the volume does not work when I select this device. Can you tell me how I can make it work? I am using a volume punch set to my rxer.


Any help would be appreciated.

Thanks!

[Mark Pierson]

Did you remember to set the appropriate device button on the General tab in IR to Cable/1554?

Also, did KM indicate if a Protocol Upgrade was also required?

[pettinej]

Yes I did set the CD and AUX button to the approiate device on the general tab in IR. KM did not indicate that a protocol upgrade was needed.

[underquark]

Any chance of uploading the IR file and KM file to the Diagnosis Area of this forum? Please also post again here and add links to those files.

[pettinej]

OK I think I found the problem. On the button page in KM the channel up and down was set to page up and page down. If I set it up to Channel up and Channel Down it fixes these buttons. I am sure I can fix the other buttons now.

I do have one other question. When I select my new device (sat) the punch through volume (which is set to my reciever) does not work anymore. It controls the volume to my sat instead of my receiver.

[The Robman]

I do have one other question. When I select my new device (sat) the punch through volume (which is set to my reciever) does not work anymore. It controls the volume to my sat instead of my receiver.

Are you assigning this SAT upgrade to a non-SAT device button? If so, that's what's breaking the VPT.

[pettinej]

That was it. Thanks for the help!