This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!
lowspeed wrote:Ok Wierd thing is suddenly statrted working...
Shame, in a way; I was looking forward to seeing how deeply one could nest quotes (I'm guessing it's about 24):
lowspeed wrote:
Capn Trips wrote:
lowspeed wrote:It's not my thread ... I just asked a follow up question....
Not your thread, but in response to a question YOU POSTED in that thread, you were provided the following:
Capn Trips wrote:
ElizabethD wrote:
Capn Trips wrote:After uploading the extended IR file, you must press TV:Power to activate the extender (All LCDs activate for a short while, followed by "SUCCESS" displayed).
Something strange about this file. May or may not be relevant. ...
2. Extender device TV/1800 isn't in the list at all.
Duhh... how did I miss that?! Of course that is your problem. You're definitely not running the extender. Read the extender documentation more closely to see what files you can and cannot delete from the extender. TV/1800 is most definitely NOT among them!
So my question is: Have you corrected your IR file to properly include the TV/1800 device? Have you then uploaded this to your remote and properly activated the extender?
If you have not, I encourage you to do so, and withhold further questions until you have.
If you have, and neither the custom mode name nor the DSM work, then it's appropriate to post your NEW IR file and ask someone to look at it.
If you have, and these capabilities now work, you're welcome.
ok i reloaded the 9910 extended IR and pressed tv -> power... said success... THe macro still doesn work :-\
So are we digressing into this silliness? We're at 7, by my current count - quite a ways to go to 25.
lowspeed wrote:Ah ah good one 25...
underquark wrote:
lowspeed wrote:Ok Wierd thing is suddenly statrted working...
Shame, in a way; I was looking forward to seeing how deeply one could nest quotes (I'm guessing it's about 24):
lowspeed wrote:
Capn Trips wrote:
lowspeed wrote:It's not my thread ... I just asked a follow up question....
Not your thread, but in response to a question YOU POSTED in that thread, you were provided the following:
Capn Trips wrote:
ElizabethD wrote:
Capn Trips wrote:After uploading the extended IR file, you must press TV:Power to activate the extender (All LCDs activate for a short while, followed by "SUCCESS" displayed).
Something strange about this file. May or may not be relevant. ...
2. Extender device TV/1800 isn't in the list at all.
Duhh... how did I miss that?! Of course that is your problem. You're definitely not running the extender. Read the extender documentation more closely to see what files you can and cannot delete from the extender. TV/1800 is most definitely NOT among them!
So my question is: Have you corrected your IR file to properly include the TV/1800 device? Have you then uploaded this to your remote and properly activated the extender?
If you have not, I encourage you to do so, and withhold further questions until you have.
If you have, and neither the custom mode name nor the DSM work, then it's appropriate to post your NEW IR file and ask someone to look at it.
If you have, and these capabilities now work, you're welcome.
ok i reloaded the 9910 extended IR and pressed tv -> power... said success... THe macro still doesn work :-\
Remotes: OFA XSight Touch, AR XSight Touch TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV RCVR: Onkyo TX-SR875; Integra DTR 40.3 DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR); Laserdisc: Pioneer CLD-D704. Amazon Firestick tape deck: Pioneer CT 1380WR (double cassette deck) (But I still have to get up for my beer)
Capn Trips wrote:So are we digressing into this silliness? We're at 7, by my current count - quite a ways to go to 25.
lowspeed wrote:Ah ah good one 25...
underquark wrote:
lowspeed wrote:Ok Wierd thing is suddenly statrted working...
Shame, in a way; I was looking forward to seeing how deeply one could nest quotes (I'm guessing it's about 24):
lowspeed wrote:
Capn Trips wrote:
lowspeed wrote:It's not my thread ... I just asked a follow up question....
Not your thread, but in response to a question YOU POSTED in that thread, you were provided the following:
Capn Trips wrote:
ElizabethD wrote:
Capn Trips wrote:After uploading the extended IR file, you must press TV:Power to activate the extender (All LCDs activate for a short while, followed by "SUCCESS" displayed).
Something strange about this file. May or may not be relevant. ...
2. Extender device TV/1800 isn't in the list at all.
Duhh... how did I miss that?! Of course that is your problem. You're definitely not running the extender. Read the extender documentation more closely to see what files you can and cannot delete from the extender. TV/1800 is most definitely NOT among them![/size]
So my question is: Have you corrected your IR file to properly include the TV/1800 device? Have you then uploaded this to your remote and properly activated the extender?
If you have not, I encourage you to do so, and withhold further questions until you have.
If you have, and neither the custom mode name nor the DSM work, then it's appropriate to post your NEW IR file and ask someone to look at it.
If you have, and these capabilities now work, you're welcome.
ok i reloaded the 9910 extended IR and pressed tv -> power... said success... THe macro still doesn work :-\
Remotes: OFA XSight Touch, AR XSight Touch TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV RCVR: Onkyo TX-SR875; Integra DTR 40.3 DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR); Laserdisc: Pioneer CLD-D704. Amazon Firestick tape deck: Pioneer CT 1380WR (double cassette deck) (But I still have to get up for my beer)
[color=darkred]u[/color][color=red]n[/color][color=orange]d[/color][color=brown]e[/color][color=yellow]r[/color][color=green]q[/color][color=olive]u[/color][color=cyan]a[/color][color=blue]r[/color][color=darkblue]k[/color] wrote:24
Why won't anyone listen to me ?
Last edited by underquark on Fri Oct 28, 2005 6:25 am, edited 1 time in total.
ElizabethD wrote:Nils, get better glasses I know a guy who could print whole Devices.xls on one page and claim it's readable
That's because Dvices.XLS is a brave effort but incomplete .
I have started a quest to find every setup code and have found several not in Devices.XLS. Unfortunately I have hit a wall as my search method consited of downloading .WAV files from OneForAll's European site (for the Kameleon URC8060 as it has plenty of buttons) and it will only let you visit a certain number of times before telling you that your download limit has been exceeded. I tried spoofing the e-mail address but it seemed to reject hotmail addresses. I think I got about 20-30 codes per device out of it so only 7800 or so to go. If anyone thinks that there is any mileage in this I can put them all into a spreadsheet and post it and volunteers can fill in the gaps (let's face it; 1 or 2 codes from each member would do it).
Hey UQ, if you need more email addresses to complete this project, I can supply you with as many email aliases as you like. In return, I'd like to see the results of your search so I can add all that info to devices.xls.
To get you started, I have created ian1 thru ian5 (at) hifi-remote (dot) com
Rob www.hifi-remote.com Please don't PM me with remote questions, post them in the forums so all the experts can help!
It's nice of you to create the e-mail addresses but how do I access them? Or do you just want a heap of WAV files heading your way? In their raw state they're a bit of a mish-mash with names such as "ad1242fasfn.WAV" so it's easier if the downloader renames them something relevant or sucks the upgrades out of them and puts them in a spreadsheet.
[EDIT]
OK, I laterally-thunked and have received the serial numbers for the first two addresses. I'll get to work on it once I can access my own machine.
I have to work an extra hour this weekend as I foolishly swapped shifts with a colleague and forgot that the clocks "fall back" (OK so it's not that relevant in the grander scheme of things; just thought I'd play the sympathy angle ).
25... Of course that is your problem. You're definitely not running the extender. Read the extender documentation more closely to see what files you can and cannot delete from the extender. TV/1800 is most definitely NOT among them!
We're at 7, by my current count - quite a ways to go to 25. 
?
.