Problems with paralel interface on URC9960

[belgianguy36]

HI,

I'm having troubles to communicate with my remote via a parallel interface. If I try to download from my remote, IR keeps telling me that there is no signature for my remote, but I do have the latest RDF file installed and the KASAKASO signature is present.

I already tried to lower the battery voltage by using a dummy battery so that i've got 4,5V battery power, but I still have the same problem.

I have a URC9960-B01 so normally this shouldn't be a problem. I tried to work via my laptop and desktop pc but always get the same problem.

The interface check gives no problem.

I seems that it was possible to download RAW data and after I tried to download, the red led came on two times. If the remote is connected to the interface, I can not operate the remote control.

I hope some of you guys know what the problem is.

[gfb107]

Did you set the RDF directory in IR? It's under the File menu
File -> Set Directory -> RDF Path...

[belgianguy36]

Yes I did. When I launched IR for the very first time, the download went very good and I was able to store my basic configuration on harddisk, but when I tried it a second time I received the error message.

I even tried to reinstall IR but that didn't changed anything.

[lukas_cz]

Hi,
what type of parallel cabel do you use? Simle or Ultra?

I've the same problem with my URC9960BJ5 and parallel simple cable.
Lukas