Losing Select/OK mapping on first device

[Plugin]

Hi

I have (among others!) a dreambox v3 jp1 remote on which I wish to have 3 upgrades - this is fine as the remote supports 4 devices.

Which ever upgrade I map to the first device (labeled "dream" in the rdf), I loose the mapping to the OK button. Everything else works fine and I can map the function of OK to a spare button. Maybe the remote is a slower or less respnsive than with the single, supplied upgrade.

Snagging the codes on the no good OK in a learning 7560, I see

"Unknown 0 KHz Signal" &
Sent once when key is pressed:
+20 -162 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106 +20 -106

and similar stuff for upon completion.

Anyone have an idea on what is happening here?

I've uploaded my ir file.

Thanks

Plugin

[gfb107]

I've uploaded my ir file.

Post a link to it, please.

[Plugin]

https://www.hifi-remote.com/forums/dload ... le_id=1806

[Plugin]

Some more info, this is somehow associated with the DBOX2 remote upgrade and its protocol.

As the 176 protocol is not known in KM or RM, I created an rdmu based entirely on the Nokia Quad protocol - but still get exactly the same problem.

I've uploaded this new rdmu as https://www.hifi-remote.com/forums/dload ... le_id=1808

This upgrade works ok (with some key moves) in my urc 7650.

I suspect this must be an rdf problem.

Any comments?

[Plugin]

OK to resolve my own problem, at least with the Nokia Quad protocol version - the problem was that I had not specified the protocol device parameters (device 1 = 13, device 2= 64)

I'm still not sure why the OFA supplied 167 protocol kills the dreambox remote.