Updated RDF's Maps, and Images Version 1.20

[Nils_Ekberg]

These RDF's are compliant with IR Version 5 & 6 and RemoteMaster(RM) V1.00 or greater
NOTE: KM does not require RDF's
RDF's for RM and IR

Full set of RM Maps and Images
All Maps and Images for RemoteMaster

NOTE: If you are using the above set of RDF's with RM you will need this full set of Maps and Images.

CHANGES:
1) Updated RDF's to support new function in RM to display phantom style buttons.
2) Updated RS-1994 extender RDF's for special protocols
3) Updated a few Maps for field name mis-matches noticed when testing change 1

You can selectively add the RDF's, Maps and Images you require however, if you choose to replace all, first remove and backup your old ones to eliminate conflicts with name changes.

NOTE: If you find anything I missed for IR version 6 or any problems please let me know and I will update ASAP

[gfb107]

Nils,

I spotted an error in the RDF for the 15-2117/2116 Extender 3.

The error is in the line

Code: Select all

DEV_TV:AllBind,DEV_VCR,DEV_CBL,DEV_SAT,DEV_CD,DEV_DVD,DEV_AUX,DEV_AUD,

You must specify a keycode when specifying new restrictions. I think the correct entry is:

Code: Select all

DEV_TV=$3C:AllBind,DEV_VCR,DEV_CBL,DEV_SAT,DEV_CD,DEV_DVD,DEV_AUX,DEV_AUD,

I haven't done a thorough check, but I saw this one on a spot check.

[Nils_Ekberg]

Thanks Greg, I fixed it and replaced it in the zip file so the right one is there.

I also then looked through some more just to be sure and I guess that was just a brain check because I did know the button value is required. Hopefully that was the only typo.

By the way, the hex value is $68

[sfhub]

I'm having trouble with this RDF set. It seems a bunch of keycodes
got replaced with commas ",". Probably this is a simplification for
defining the keycodes.

My SET_LCD in my macros is being replaced with Key127 (or
something similar) and my extender no longer works. I think there
is a typo in the RDF for 15-2116 ext2 (and I think others files also)
I only looked at ext2 and ext3.

I'm using IR6.

I think what is happening is Dev_Cancel should be keycode $78, but
based on counting the items, the new change would start Dev_Cancel
at $77, which throws the rest of the items off by one and wreaks havoc
in my configuration.

Code: Select all

DEV_TV=$68,DEV_VCR,DEV_CBL,DEV_SAT,DEV_CD,DEV_DVD,DEV_AUX,DEV_AUD,
DEV_DB08[MySys]=$70
DEV_DB09=$71,DEV_DB10,DEV_DB11,DEV_DB12,DEV_DB13,DEV_DB14
Dev_Cancel=$78
SET_TRANS_KEYS=$79,SET_VOL_KEYS,SET_CHAN_KEYS,SET_MENU_KEYS,SET_PIP_KEYS,SET_OTHER_KEYS
SET_LCD=$7F

Code: Select all

DEV_TV=$68:AllBind,DEV_VCR,DEV_CBL,DEV_SAT,DEV_CD,DEV_DVD,DEV_AUX,DEV_AUD,
DEV_DB08[MySys],
DEV_DB09,DEV_DB10,DEV_DB11,DEV_DB12,DEV_DB13,DEV_DB14,
Dev_Cancel,
SET_TRANS_KEYS,SET_VOL_KEYS,SET_CHAN_KEYS,SET_MENU_KEYS,SET_PIP_KEYS,SET_OTHER_KEYS,
SET_LCD

[Nils_Ekberg]

Your correct, the Dev_Cancel line should be

Code: Select all

Dev_Cancel=$78:AllBind,

in the 2116/2117 extender 2 and 3 RDF's and it will work fine.

[cearnsdorff]

The RDF v1.20 still contains the old "Dev_Cancel," syntax.
I was a bit confused by the direction of my problem to this thread. After looking at the syntax I realized the v1.20 version still contains the last error indicated in this posting. This still needs the "Dev_Cancel=$78:AllBlind," correction.

I thought others who find there way here would like to know that they still need to manually make this correction in the RDF definition for the RS 15-2116/7 extender version 1.20.

[sfhub]

I think Nils just forgot to upload the fixed 1.20.

We discussed the problem and solution and I figured he'd uploaded a
fixed version, but the last update time stamp for the RDF files is 3/10/2005

[Nils_Ekberg]

I thought I did upload it and the ones in my working folder are actually correct.

So, it is now fixed in the 1.21 RDF's I just uploaded. Try them out and let me know if all is OK now.

Sorry and thanks