|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
finger_burns
Joined: 20 Oct 2003 Posts: 2
|
Posted: Mon Oct 20, 2003 7:12 pm Post subject: Dish Network Receivers |
|
|
I have an 8811 which works, out of the box, with neither of my Dish Network Receviers, one of which is an Echostar Model 4000, the other a later model JVC. This, despite the fact that the manual includes satellite device codes for both makes. The remote can, however, successfully learn codes to control them. I get the impression, after scanning the forums and docs, that there might be some history regarding these devices (an erroneous protocol, perhaps?). When I examine learned commands in IR.EXE, it indicates the "dishplayer (old)" protocol (for the JVC, anyway). Can anyone shortcut me to the relevant info, if it exists?
Also, is there a document that contains background info about ERCs, OBCs, Protocols, Upgrades, Extensions, etc.? I'm slowly putting the picture together, but it's taking a lot of time scouring the docs, spreadsheets and source to piece together the answers. Matters are made more complicated by the fact that I don't have Excel, and the Java alternative does not seem to be usable yet, at least not for my remote.
My gratitude and admiration to the members of this forum who have created the tools and docs to customize these remotes. I have every expectation that, once I assemble the appropriate details, I'll be able to use them to extract far more functionality from this remove than would have been, otherwise, possible.
Thanks in Advance,
Dave |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Mon Oct 20, 2003 7:45 pm Post subject: Re: Dish Network Receivers |
|
|
finger_burns wrote: | I have an 8811... with neither of my Dish Network Receviers, one of which is an Echostar Model 4000, the other a later model JVC |
There's several Dish files in the Satellite folder. One of them will likely work for yours.
Quote: | and the Java alternative does not seem to be usable yet, at least not for my remote. |
RM does support the 8811... what makes you think it doesn't?. You need to make sure you have the latest RM-compliant RDF's which are available here. _________________ Mark |
|
Back to top |
|
|
finger_burns
Joined: 20 Oct 2003 Posts: 2
|
Posted: Wed Oct 22, 2003 6:38 pm Post subject: |
|
|
Turns out the sub-device value, in IR parlance, was 2 for my remote. RM calls this parameter "unit", which caused me some bit of confusion. Why the difference in terminology? How many values for sub-device do various dish network receivers use? Why would it ever be changed?
My problems with RM were due to a wrong RDF file. I was trying to use the set of RDFs that looked like they were supposed to work for both IR and RM. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Wed Oct 22, 2003 8:08 pm Post subject: |
|
|
IR's terminology is limited, it just calls things "device codes" and "sub-device codes". KM and RM, on the other hand, have the ability to customise the labels based on the protocol at hand. Typically the second device code is also called sub-device code in both KM and RM, but when it is known to be a code that is used to differentiate between identical devices, it's called a "unit code" _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
birdman-2
Joined: 21 Oct 2004 Posts: 8 Location: Kansas |
Posted: Thu Oct 28, 2004 1:11 pm Post subject: Have you got it working with your DISH 4000 yet? |
|
|
finger_burns wrote: | Turns out the sub-device value, in IR parlance, was 2 for my remote. RM calls this parameter "unit", which caused me some bit of confusion. Why the difference in terminology? How many values for sub-device do various dish network receivers use? Why would it ever be changed?
My problems with RM were due to a wrong RDF file. I was trying to use the set of RDFs that looked like they were supposed to work for both IR and RM. |
I have a RS 15-2117 remote and have not been able to get it working yet. What code did you use to get it to recognize your 4000?
Thanks for your assistance!!! _________________ Just my Two Cents... |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|