elta div 8882

peduz · Post by **peduz** » Sun Aug 08, 2004 5:28 pm

can you help me in finding the code please?

gfb107 · Post by **gfb107** » Sun Aug 08, 2004 5:38 pm

Have you read The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)?

Post by **The Robman** » Sun Aug 08, 2004 7:11 pm

I'm guessing not.

peduz · Post by **peduz** » Mon Aug 09, 2004 4:35 pm

sorry i'm still reading it.
But my english is bad and i don't even know where to start from.
I've got a jp1 remote, but not the original

johnsfine · Post by **johnsfine** » Mon Aug 09, 2004 4:55 pm

By "div" I expect you meant DVD.
There is a CCF file here Elta DVD 8882a (in case other experts want to look).

I'll post again shortly with information (from that CCF file) that can be used with your JP1 remote.

But which model JP1 remote is it? And do you also have the JP1 cable?

johnsfine · Post by **johnsfine** » Mon Aug 09, 2004 5:10 pm

There is no built-in setup code for this in any JP1 remote that I have info on. So you need an upgrade. That can be done by JP1 cable in any JP1 remote or by .wav file in some.

The CCF file is for NEC1 protocol, device 0, subdevice 223.

There are 42 commands consisting of 23 of the 31 OBC numbers from 1 to 31, plus 19 of the 22 OBC numbers from 65 to 86.

Since designers tend not to leave gaps that way, the unused OBC numbers in those ranges and maybe also 87 through 95 probably are meaningful commands as well.

You will need to put a little thought into how you want to arrange that many commands over the limited number of buttons on your remote.

When you tell me which model remote and whether you want to use JP1 cable or .wav, I'll copy/paste the data I extracted into a RemoteMaster file to get you started.

[Edit - Rob]Here's an upgrade based on the CCF file...
https://www.hifi-remote.com/forums/dload ... le_id=4585

Here's a link to Elta's web site:
http://www.elta-abas.de/elta.php