Discrete codes for Emerson EWD7003 DVD player

joec1936 · Post by **joec1936** » Sun May 02, 2004 12:51 pm

I have not been able to locate the discrete on/off codes for my Emerson EWD7003 DVD player, set up code 0675.

Does anyone have knowledge of these codes? Thanks

jon_armstrong · Post by **jon_armstrong** » Sun May 02, 2004 3:12 pm

I don't know for sure but it probably doesn't have discrete power codes. Have you tried the Play command from Off. If that works, then a macro for Play|Stop=On and Play|Power=Off

joec1936 · Post by **joec1936** » Mon May 03, 2004 9:05 am

jon_armstrong wrote: Have you tried the Play command from Off. If that works, then a macro for Play|Stop=On and Play|Power=Off

I'm not sure what your recommendation means. What is "Play command from OFF", and what is " Play|Stop=On and Play|Power=Off"

Mark Pierson · Post by **Mark Pierson** » Mon May 03, 2004 9:27 am

If the unit is powered OFF and you press Play, does it turn ON?

If so, then you can probably use macros to simulate the discrete power commands. To turn the unit ON, you would send "Play;Stop". To turn it OFF, "Play;Power"

joec1936 · Post by **joec1936** » Mon May 03, 2004 1:01 pm

Mark Pierson-Tried your suggestion with the DVD and it worked. Thanks for your help

Mark Pierson · Post by **Mark Pierson** » Mon May 03, 2004 1:48 pm

That's was Jon's suggestion... I was just repeating what he said!

Glad it worked for you.