Discrete Codes for Strong 5390

bevancoleman · Post by **bevancoleman** » Thu Apr 22, 2004 7:26 am

Does anyone know if there are any discrete on/off codes for s Strong 5390.

The Strong 5390 is a digital TV receiver with a 80gb hdd for recording. I've learnt all the basic buttons so far, but the remote dosn't have any discrete buttons

I have a urc-8811 learning remote with a JP1 cables and software.

Mark Pierson · Post by **Mark Pierson** » Thu Apr 22, 2004 8:00 am

What are the Protocol, Device, and Sub-Device details for the signals you've learned?

bevancoleman · Post by **bevancoleman** » Thu Apr 22, 2004 9:22 am

Mark Pierson wrote:What are the Protocol, Device, and Sub-Device details for the signals you've learned?

Protocol: NEC1
Device: 0
Sub-Device: 0

The power toggle is EFC=181, OBC=0, Hex=ff

I found a code for the 5290 (presious model) which was EFC=201, however I havn't had any luck

princi · Post by **princi** » Tue Dec 06, 2005 5:06 am

I've just bought a Strong 5390 and am trying to control it via a SlingBox.

I don't have a learning remote, therefore I'm hoping someone else out there has already done it and can point me in the direction of the upgrade file.

I know how to apply update files (applied a file for a strong 5290) but nothing is working at all.

Would greatly appeciate some assistance.

Thanks...