Digital Cameras for IR Detection
Moderator: Moderators
- 
				vickyg2003
 - Site Admin
 - Posts: 7104
 - Joined: Sat Mar 20, 2004 12:19 pm
 - Location: Florida
 - Contact:
 
Digital Cameras for IR Detection
I've often recommended using a phone to check if a signal is being sent by the original remote.  I used to do that all the time.  I just had to do this tonight and found my iPhone 6 doesn't show IR signals anymore.  I happened to have my old iPhone 4 charged up and sure enough that digital camera shows them fine.  So the phone's digital camera's may not work for testing anymore.  I'd really like to know if this is a problem for all newer cell phones, or only an apple issue.  
If you have a newer smart phone or newer digital camera could you report back here with a letting us know if it still does see IR signals.
EDIT:
Here are the results.
A cell phone camera is almost always the most convenient way of determining if there is an ir signal being transmitted from an ir blaster or remote. The IR typically signal shows up as a flickering white light when a signal is being sent.
We've discovered a wrinkle in that newer high end cameras are filtering out the ir signals. If you have a recent apple phone, the back camera will not register Infrared signals, but the lower quality front facing cameras still work fine for detection.
Some cameras like my Sony CX 5000 barely register the infrared signals. If I didn't know what I was looking for, I never would have seen it.
So make sure to check the front facing camera of your phone before you declare a remote or ir blaster to be dead.
---------------
smart phones
---------------
iphone 4 - yes
iphone 4s -yes
iphone 5 - back NO front YES
iphone 5c -back NO front YES
iphone 6 -back NO front YES
iphone 6s -back NO front YES
iphone SE - back NO front YES
Google Pixel - probably yes
Nexus 4 - yes
Nexus 5 - yes
Nexus 6P - yes
One Plus 3t - Yes
Samsung Galaxy 7 - Yes
----------
Cameras
----------
Canon A70 - yes
Canon A720IS - yes
Canon Eo64500D (DSLR) yes
Canon S5IS - yes
Logitech C270 (Webcam) - yes
Sony CX 5000 - Yes but very dim
Sony Xperia Z2 - Yes
			
			
													If you have a newer smart phone or newer digital camera could you report back here with a letting us know if it still does see IR signals.
EDIT:
Here are the results.
A cell phone camera is almost always the most convenient way of determining if there is an ir signal being transmitted from an ir blaster or remote. The IR typically signal shows up as a flickering white light when a signal is being sent.
We've discovered a wrinkle in that newer high end cameras are filtering out the ir signals. If you have a recent apple phone, the back camera will not register Infrared signals, but the lower quality front facing cameras still work fine for detection.
Some cameras like my Sony CX 5000 barely register the infrared signals. If I didn't know what I was looking for, I never would have seen it.
So make sure to check the front facing camera of your phone before you declare a remote or ir blaster to be dead.
---------------
smart phones
---------------
iphone 4 - yes
iphone 4s -yes
iphone 5 - back NO front YES
iphone 5c -back NO front YES
iphone 6 -back NO front YES
iphone 6s -back NO front YES
iphone SE - back NO front YES
Google Pixel - probably yes
Nexus 4 - yes
Nexus 5 - yes
Nexus 6P - yes
One Plus 3t - Yes
Samsung Galaxy 7 - Yes
----------
Cameras
----------
Canon A70 - yes
Canon A720IS - yes
Canon Eo64500D (DSLR) yes
Canon S5IS - yes
Logitech C270 (Webcam) - yes
Sony CX 5000 - Yes but very dim
Sony Xperia Z2 - Yes
					Last edited by vickyg2003 on Sun Aug 20, 2017 1:16 pm, edited 5 times in total.
									
			
						
							Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
			
						Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Abstractly speaking, a camera should depict the picture as close a possible to the way the human eye sees it. So, a camera not responsible to IR is the better camera. My guess is that less and less "high-end" cameras will be responsible to IR.
Responsible to IR:
* Sony Xperia Z2,
* Canon EOS450D (DSLR)
* Logitech C270 (Webcam)
			
			
									
						
										
						Responsible to IR:
* Sony Xperia Z2,
* Canon EOS450D (DSLR)
* Logitech C270 (Webcam)
- 
				vickyg2003
 - Site Admin
 - Posts: 7104
 - Joined: Sat Mar 20, 2004 12:19 pm
 - Location: Florida
 - Contact:
 
Thanks Phil, Bengt and Edmund.
Its disappointing that there are so few responses after so many views when its such an easy test to perform. Hopefully it is just that they all have one of the smart phone models listed
---------------
smart phones
---------------
iphone 4 - yes
iphone 4s -yes
iphone 5 - unknown
iphone 5c -unknown
iphone 6 -NO
iphone 6s - unknown
iphone SE - NO
One Plus 3t - Yes
Samsung Galaxy 7 - Yes
----------
Cameras
----------
Canon Eo64500D (DSLR) yes
Logitech C270 (Webcam) yes
Sony CX 5000 - Yes but very dim
Sony Xperia Z2, Yes
			
			
									
						
							Its disappointing that there are so few responses after so many views when its such an easy test to perform. Hopefully it is just that they all have one of the smart phone models listed
---------------
smart phones
---------------
iphone 4 - yes
iphone 4s -yes
iphone 5 - unknown
iphone 5c -unknown
iphone 6 -NO
iphone 6s - unknown
iphone SE - NO
One Plus 3t - Yes
Samsung Galaxy 7 - Yes
----------
Cameras
----------
Canon Eo64500D (DSLR) yes
Logitech C270 (Webcam) yes
Sony CX 5000 - Yes but very dim
Sony Xperia Z2, Yes
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
			
						Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
The CCD and CMOS chips are very sensitive to (near) IR light. Because of that all digital cameras are equipped with IR cut-off filters in their optics. Some filters are better than others making the IR from the remote's blaster not being visible by the chip.
Most Canon point-and-shoot cameras are sensitive to IR. I've had few models (A70, A720IS, S5IS) and they all "see" IR signals.
All Nexus phones I've had (Nexus 4, Nexus 5, Nexus 6P now) have IR sensitive cameras. I think Nexus 5X also should be sensitive as it uses the same camera module as 6P. I think both Google Pixel phones from last year also use the same or very similar camera module.
			
			
									
						
							Most Canon point-and-shoot cameras are sensitive to IR. I've had few models (A70, A720IS, S5IS) and they all "see" IR signals.
All Nexus phones I've had (Nexus 4, Nexus 5, Nexus 6P now) have IR sensitive cameras. I think Nexus 5X also should be sensitive as it uses the same camera module as 6P. I think both Google Pixel phones from last year also use the same or very similar camera module.
Marcin
			
						- 
				vickyg2003
 - Site Admin
 - Posts: 7104
 - Joined: Sat Mar 20, 2004 12:19 pm
 - Location: Florida
 - Contact:
 
Thanks for the information Marcin.  I've updated the first post with the models you provided.
			
			
									
						
							Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
			
						Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Nothing on my iPhone 6s
			
			
									
						
							-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
			
						Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
- 
				vickyg2003
 - Site Admin
 - Posts: 7104
 - Joined: Sat Mar 20, 2004 12:19 pm
 - Location: Florida
 - Contact:
 
Thanks Greg.
Bob THANK YOU!! I never thought of using the front camera.!!!! That works great.
			
			
									
						
							Bob THANK YOU!! I never thought of using the front camera.!!!! That works great.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
			
						Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
- 
				zaphod7501
 - Posts: 536
 - Joined: Mon Aug 02, 2004 7:07 pm
 - Location: Peoria Illinois
 
iPhone 6s front FaceTime camera: yes
			
			
									
						
							-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
			
						Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
- 
				unclemiltie
 - Expert
 - Posts: 1819
 - Joined: Wed Jan 21, 2004 12:50 pm
 - Location: Pittsburgh, PA
 
Correct!. the CMOS and CCD image sensors used in almost every digital camera ever made are very sensitive to IR. So much so that every camera has an IR filter put on in front of the sensor to take the IR out because the signal will overwhelm the visible signal. Often this is an IR filter coated onto one of the lens elements.Barf wrote:Abstractly speaking, a camera should depict the picture as close a possible to the way the human eye sees it. So, a camera not responsible to IR is the better camera. My guess is that less and less "high-end" cameras will be responsible to IR.
The more expensive cameras have better IR filters and thus the signal that actually reaches the sensor is "more true" to the visible light than the cheaper ones. But as a result they are less sensitive to IR frequencies.
this JP1 stuff is a sickness!
			
						- 
				HamburgerHelper1
 - Posts: 702
 - Joined: Sat Feb 22, 2014 2:58 pm
 
ir detection
If your camera won't do the trick for testing ir output 
You can try pointing your remote at a night light
I tested this today A dark room with photo sensor night light
I had to be about an inch from the sensor but push remote buttons
and the night light flickers to the pulse of the Ir
Just giving you another option for testing if Ir is outputting
			
			
									
						
										
						You can try pointing your remote at a night light
I tested this today A dark room with photo sensor night light
I had to be about an inch from the sensor but push remote buttons
and the night light flickers to the pulse of the Ir
Just giving you another option for testing if Ir is outputting
- 
				vickyg2003
 - Site Admin
 - Posts: 7104
 - Joined: Sat Mar 20, 2004 12:19 pm
 - Location: Florida
 - Contact:
 
With an occupation of "mobile phone camera modules" we will definitely defer to you on this. Thanks for your input Bill.unclemiltie wrote:Correct!. the CMOS and CCD image sensors used in almost every digital camera ever made are very sensitive to IR. So much so that every camera has an IR filter put on in front of the sensor to take the IR out because the signal will overwhelm the visible signal. Often this is an IR filter coated onto one of the lens elements.Barf wrote:Abstractly speaking, a camera should depict the picture as close a possible to the way the human eye sees it. So, a camera not responsible to IR is the better camera. My guess is that less and less "high-end" cameras will be responsible to IR.
It took me a while to locate my night light with the light sensor and find a working light bulb to fit it, and find an outlet in a dark room, but I see that it does show you that the IR is sending signals. Not nearly as convenient as looking at it in the hand held phone in any light. Thanks for the idea. Its just one more way to test in a home where a user has light sensitive night lights and no cell phone. That really does apply to lots of my elderly friends.HambergerHelper1 wrote:You can try pointing your remote at a night light
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
			
						Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.