View previous topic :: View next topic |
Author |
Message |
wormsdriver
Joined: 09 Apr 2017 Posts: 3
|
Posted: Sun Apr 09, 2017 7:10 am Post subject: help with Adcom GTP-500 pre amp |
|
|
I recently bought a used GTP-500 with no remote included and I would really like some help from you guys here please.
I have a Vizio vur8 remote and it has a jp1.3 6 pin on the back.
I tried several things like the 990 and 991 commands but did not work, please help. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Apr 09, 2017 9:51 am Post subject: |
|
|
Use Setup code Audio 1530 and the EFCs listed in this older thread about the GTP-500. Note that the GTP-500II uses a different IR protocol, so make sure that you've got a 500.
To add the EFCs to your VUR8, use the 994 command.
1) Tap the Audio button
2) Hold the Setup button until 2 blinks
3) Enter 994
4) Tap Setup (don't hold it)
5) Enter the 5 digit EFC
6) Tap the button you want to assign the function to.
The remote should blink twice. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Sun Apr 09, 2017 10:34 am Post subject: |
|
|
Here are the codes:
00240 = 1
00080 = 2
00144 = 3
00017 = 4
00006 = 5
00030 = 6
00238 = 7
00034 = 8
00242 vol up
00082 vol down
00015 Power
00142 Source
00078 FM/AM
00146 Tune Up
00019 Tune Down _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
wormsdriver
Joined: 09 Apr 2017 Posts: 3
|
Posted: Sun Apr 09, 2017 4:13 pm Post subject: |
|
|
3FG wrote: | Use Setup code Audio 1530 and the EFCs listed in this older thread about the GTP-500. Note that the GTP-500II uses a different IR protocol, so make sure that you've got a 500.
To add the EFCs to your VUR8, use the 994 command.
1) Tap the Audio button
2) Hold the Setup button until 2 blinks
3) Enter 994
4) Tap Setup (don't hold it)
5) Enter the 5 digit EFC
6) Tap the button you want to assign the function to.
The remote should blink twice. |
First of all I want to thank you guys very much for your help. Second, I'm a bit embarrassed but how do I input setup code Audio 1530? Do I need a jp1 cable? |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Apr 09, 2017 8:12 pm Post subject: |
|
|
Press Audio. Press setup until 2 blinks. Enter 31530. The remote should blink twice. |
|
Back to top |
|
|
wormsdriver
Joined: 09 Apr 2017 Posts: 3
|
Posted: Sun Apr 09, 2017 9:18 pm Post subject: |
|
|
Thank you guys so much! I got it working! ...(except for the power button)
Very interesting stuff, I had no idea just how many can be done with an old remote. Awesome!
Please direct me where i can send a small donation to this site through PayPal in my appreciation for your help. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
|
Back to top |
|
|
|