View previous topic :: View next topic |
Author |
Message |
dennisb643
Joined: 23 Oct 2009 Posts: 1 Location: Md |
Posted: Fri Oct 23, 2009 2:45 pm Post subject: |
|
|
Vickyg2003...thank you very much for your advice. Programming my MarantzSR5300 worked (I can stop pulling my hair out now). I have an Insigna TV now that I need the codes to as well. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 23, 2009 4:07 pm Post subject: |
|
|
Dennisb643, please start a new thread if you need help with the Insignia. Make sure to USE THE TEMPLATE when you make your post. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
slh11
Joined: 24 Jan 2010 Posts: 1
|
Posted: Sun Jan 24, 2010 10:17 am Post subject: Comcast & Marantz |
|
|
I have read all the posts and instructions for programming my comcast remote and the Marantz receiver. I followed the instuctions and the receiver turned off but it won't turn on. What did I do wrong? PS: I have a SR6004 if that makes a difference. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Jan 24, 2010 12:54 pm Post subject: |
|
|
If you are using 30189 as the basic setup code for AUX, keymove in EFC 00036 for Power toggle.
If you are using 21781, enter EFC 29193.
This is device (called system in Marantz parlance) 16, OBC (command) 12. The Comcast remote can't send discrete power On/Off signals, according to the Marantz spreadsheet. Setup code 30189 sends 17.12 for power toggle rather than 16.12. |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Tue Feb 07, 2012 6:43 pm Post subject: Re: Comcast DVR remote and Marantz Receiver |
|
|
icellama wrote: | 1. Device: Marantz SR-5300
4. JP1/UEI Remote model: Comcast 3-1 DVR, newest from service center |
Found matches already in our File Section.
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
mushiepj
Joined: 28 Oct 2012 Posts: 3
|
Posted: Sun Oct 28, 2012 12:52 pm Post subject: |
|
|
I think this thread might be closed, but i'll take a shot anyway. I have a Marantz NR1501 and the setup codes/EFC codes are working well, but I have inputs Blu-Ray and/or Game that I'd like to control but do not see any EFC for them in the thread or in the attached files. Wondering if anyone knows what they are? I really need Blu-Ray, but might be able to get away with Game.
Thank you! |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Oct 28, 2012 1:37 pm Post subject: |
|
|
Marantz makes all of the codes available.
However, the Game and Blu-Ray inputs use the RC5x IR protocol rather than RC5. Setup code 21781 can send only device 31 or 0 in RC5x, and the needed device number is 16 for Game and 07 or 28 for BD.
So unless you get a JP1.3 interface cable, I don't think you can make this work. |
|
Back to top |
|
|
mushiepj
Joined: 28 Oct 2012 Posts: 3
|
Posted: Sun Oct 28, 2012 1:53 pm Post subject: |
|
|
Thanks for the quick response, what if I used the setup code 30189? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Sun Oct 28, 2012 2:38 pm Post subject: |
|
|
You don't mention which UEI remote you are using, but if it has one of the following 3 setup codes in it, you might be in luck:
Audio/0070
Audio/0172
Audio/0412
Audio/0892
TV/0444
Using one of those setup codes, the following EFC5 codes should work:
12021 = Blu-ray
11989 = Game _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Capt. Midnight
Joined: 24 Nov 2013 Posts: 2
|
Posted: Sun Nov 24, 2013 3:29 pm Post subject: Code for Comcast remote to control Marantz NR1501 receiver |
|
|
Hi there!
I have an older Comcast remote that will power on/off my Marantz NR1501 receiver. However, when Comcast installed a new box with a DVR, the remote they left, when 'coded' with the Comcast code for the receiver (30189), it would not turn the receiver on/off. Is there another code that can be used, or do I need to exchange the Comcast remote for another remote? _________________ 5806 |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Nov 24, 2013 5:30 pm Post subject: |
|
|
Did you read the thread?
3FG wrote: | If you are using 30189 as the basic setup code for AUX, keymove in EFC 00036 for Power toggle. |
Keymove instructions found in the Wiki
Note that Power keys usually will not take a keymove, so you'll need to put it somewhere else |
|
Back to top |
|
|
Capt. Midnight
Joined: 24 Nov 2013 Posts: 2
|
Posted: Sun Nov 24, 2013 6:48 pm Post subject: EFC Input Procedure |
|
|
Yes, I read the post, and the 'backup' material. Here's what I did using the Comcast remote that came with the DCX3501 'box':
Pressed 'Aux' button (red light flashed once)
Pressed/held 'Setup' button; got 2 red flashes; released it;
Keyed in 994
Keyed the 'Setup' button
Keyed in 00036
Pressed the 'Aux' button; got one red flash
Tried to turn on/off the Marantz NR1501 receiver (verified that the receiver IR is 'on'); the Marantz remote works fine, and controls all receiver functions properly.
_________________ 5806 |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Nov 24, 2013 7:35 pm Post subject: Re: EFC Input Procedure |
|
|
Capt. Midnight wrote: | Yes, I read the post, and the 'backup' material. Here's what I did using the Comcast remote that came with the DCX3501 'box':teon; got 2 red flashes; released it;
Keyed in 994
Keyed the 'Setup' button
Keyed in 00036
Pressed the 'Aux' button; got one red flash
Tried to turn on/off the Marantz NR1501 receiver (verified that the receiver IR is 'on'); the Marantz remote works fine, and controls all receiver functions properly.
|
The problem is your target key in the last step
There are a few button restrictions on a keymove target. "Power", and the device buttons in this case "Aux", "CBL" and "TV" and the "Setup" button are usually off limits.
Try the "A" key for the last step
Press Aux key
Press the "Setup" key, until you get 2 red flashes; released it;
Key in 994
Key the 'Setup' button
Key in 00036
Pressed the 'A' button; get two red flash
"A" should now turn on and off the unit _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
|