slingbox remote code for BT Vision+
Moderator: Moderators
slingbox remote code for BT Vision+
Hi All, Does anyone have a binary remote code file for a BT Vision+ STB (new black box one) for a Slingbox HD pro (brought in the UK). thanks in advance.
Since you didn't give me an exact model, I used the BT Vision V+ profile from the Logitech Harmony Database. The IR signals were recorded with the respective JP1 tools to create the following files.
- ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10206
- RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10207
- BIN files: https://www.hifi-remote.com/forums/dload ... e_id=10208
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
slingbox codes for Btvision plus
I have just connnected by slingbox classic to Btvision plus and had some problems so thought I would post here to help others in same boat.
The first problem is if you wish to put slinbox in a different room then Black Btvision plus box does not modulate the Rf coax output so you need to get a modulator. This triax model is about the best and will convey your Ir signal in the other direction
http://www.amazon.co.uk/TRI-LINK-Contro ... 591&sr=8-1
Then the slingbox does not have codes for btvision+ (only btvision) so you need to add the files bin files in the email above.
I still had a problem however that whilst the triax says it works with the sky magic eye it would not carry the Ir signals from the slingbox to the Btvision+. It worked Ok using the remote control through the magic eye but not slingbox.
I found however that if I used the magic eye supplied with the triax then it all worked fine.
So the lesson from this is to use the magic eye supplied with the triax and not rely on the existing sky magic eye even if it appears to work in other ways
Steve
The first problem is if you wish to put slinbox in a different room then Black Btvision plus box does not modulate the Rf coax output so you need to get a modulator. This triax model is about the best and will convey your Ir signal in the other direction
http://www.amazon.co.uk/TRI-LINK-Contro ... 591&sr=8-1
Then the slingbox does not have codes for btvision+ (only btvision) so you need to add the files bin files in the email above.
I still had a problem however that whilst the triax says it works with the sky magic eye it would not carry the Ir signals from the slingbox to the Btvision+. It worked Ok using the remote control through the magic eye but not slingbox.
I found however that if I used the magic eye supplied with the triax then it all worked fine.
So the lesson from this is to use the magic eye supplied with the triax and not rely on the existing sky magic eye even if it appears to work in other ways
Steve