Humax 9150T

stenning · Post by **stenning** » Tue Nov 29, 2011 5:10 am

Hi

I have a Slingbox solo with a Humax 9150T and wondered if anyone has a better remote to use that the default 9200 I am using at the moment?

Problems seem to be:

- record button doesnt work?
- skipping 2 places when using the up or down button for options

Thanks!!

eferz · Post by **eferz** » Tue Nov 29, 2011 11:08 am

stenning wrote:Hi

I have a Slingbox solo with a Humax 9150T and wondered if anyone has a better remote to use that the default 9200 I am using at the moment?

Problems seem to be:

- record button doesnt work?
- skipping 2 places when using the up or down button for options

Thanks!!

Have you looked at our File Section for Humax. I believe Alan Richey built quite a few of them over the years and some of them may resolve the issues.

Post by **The Robman** » Tue Nov 29, 2011 12:30 pm

Al's Slingbox binary files:
https://www.hifi-remote.com/forums/dload ... le_id=7059

RMDU file:
https://www.hifi-remote.com/forums/dload ... le_id=7060

stenning · Post by **stenning** » Wed Jun 06, 2012 1:35 am

Hi, can anyone get the record button to work for this? I cant seem to record a program?

Thanks.

alanrichey · Post by **alanrichey** » Wed Jun 06, 2012 11:25 pm

Ok, I have revisited this Custom Remote. The good news is that I found the Blue/Yellow buttons were reversed, the Harmony profile had a lot more functions available so I added about 12 extra functions and I was able to set the repeat value to zero to avoid the 'double-skipping'. The bad news is that the Record button code is correct.

Have a try with the new version at https://www.hifi-remote.com/forums/dload ... e_id=10997

stenning · Post by **stenning** » Wed Jun 06, 2012 11:48 pm

Hi Alan

Thanks SO much for your help with this.

To confirm before I change anything, is the record button the same with no changes?

When I click the record button nothing seems to happen?

Thanks

Lee

stenning · Post by **stenning** » Wed Jun 06, 2012 11:52 pm

Sorry just to confirm, do you know the button to see the list of programs recorded?

alanrichey · Post by **alanrichey** » Thu Jun 07, 2012 12:43 am

stenning wrote:To confirm before I change anything, is the record button the same with no changes?When I click the record button nothing seems to happen?

Can't explain that, this remote has been used by over 100 people and you are the first to have this problem.

And the List function is Custom 13, as it says in the instructions

stenning · Post by **stenning** » Thu Jun 07, 2012 1:25 am

Thanks Alan, can i ask how you access the custom 13 option?

Thanks

alanrichey · Post by **alanrichey** » Thu Jun 07, 2012 1:35 am

You read the instructions

Although I accept that applies only to the standalone Slingplayer. If you are using the Web Player then right-click on the remote.

stenning · Post by **stenning** » Thu Jun 07, 2012 11:52 pm

Hi Alan

Thanks for all your help.

I am using the web player, I can see a record option, but not a custom 13 option??

Any guidance is appreciated.

Thanks

Lee

alanrichey · Post by **alanrichey** » Fri Jun 08, 2012 12:49 am

I can only repeat what I said in my last post "..If you are using the Web Player then right-click on the remote...".

Have you not tried that ?

stenning · Post by **stenning** » Sat Jun 09, 2012 11:27 pm

Hi Alan

I am so sorry to hassle you but could I ask one more question?

It seems that I may be recording programs on the PVR but I can access the list of programs recorded.

Do you know where this button is on the slingbox standalone player control?

The easiest way of selecting a recorded programme to watch is to press (Play
list, which is under the slide-down cover at the bottom of the remote controller).
You can select which recording you want to play using the Cursor▲ or Cursor▼.
Press OK to play the highlighted recording.

....the play list?

Thanks so much, regards Lee

alanrichey · Post by **alanrichey** » Sat Jun 09, 2012 11:57 pm

Sorry, but you obviously don't understand what I am doing here. I have no idea what any of these devices look like. All I get from the database is a list of available functions for a given device, and what IR code is needed. I map those functions to the correct button and build a binary file to be downloaded tithe Slingbox. If a function does not have a natural button on the basic remote image then I add it to the Custom List. So in your case, EVERY function that is in the database for 9150 has been included. So, if it isn't obvious from the instructions which function you need then othe only thing you can do is test each of the Custom Bustoms and see if they carry out the operation you want. If none of them work then the function you need has not been specified in the database. In that case the only solution is to try and find it by trial and error. But that an get quite challenging and you need to be very computer-literate. Are you ?

stenning · Post by **stenning** » Sun Jun 10, 2012 12:01 am

Okay, I will have a play myself - sorry I am not that techincal.

Thanks for all your help its really appreciated.

I wont hassle again.

THANKS! and sorry to hassle you. I DO appreciate your help.

JP1 Remotes

Humax 9150T

Humax 9150T

Re: Humax 9150T