View previous topic :: View next topic |
Author |
Message |
chicone
Joined: 04 Jun 2009 Posts: 2
|
Posted: Thu Jun 04, 2009 3:25 pm Post subject: Ir Hex codes Humax PDR iCord for Pronto |
|
|
1. Device: Humax PDR iCord HD
2. Type of device: DSS
3. Year: 2009
4. JP1/UEI Remote model: Pronto Pro NG, TSU 7000
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section?Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
10. Learning remote question? N/A
I would need only the Pronto hex codes for the following commands: P+, P-, Opt+ and Archiv
Thank You for trying to help me
Chicone |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Thu Jun 04, 2009 6:04 pm Post subject: |
|
|
You have a Pronto and the original remote, so why can't you just learn the buttons yourself using the Pronto. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
chicone
Joined: 04 Jun 2009 Posts: 2
|
Posted: Fri Jun 05, 2009 1:25 am Post subject: |
|
|
Thank you Rob for your answer.
Of course I did already, what you recommend, several times...And I had complete success whith all my other devices except the Humax PDR icord HD.
I even called the customer service of Humax in Germany and they told me that teaching the Pronto these ir codes is impossible because of " different frequencies". I'm not sure he was right, because most of the ir commands of the older PDR 9700 work with my iCord.
The four codes mentioned in my initial post are in fact those I still miss.
Chicone |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Fri Jun 05, 2009 7:51 am Post subject: |
|
|
What he probably means is that the carrier frequency is too high for the Pronto to capture it, which is possible. If you could get them to give you the spec for the signals, it's possible to create pronto hex that replicates high frequencies. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Sun Feb 05, 2012 1:52 am Post subject: Re: Ir Hex codes Humax PDR iCord for Pronto |
|
|
chicone wrote: | 1. Device: Humax PDR iCord HD
4. JP1/UEI Remote model: Pronto Pro NG, TSU 7000
5. Do you have a JP1 cable? No
I would need only the Pronto hex codes for the following commands: P+, P-, Opt+ and Archiv
|
In case you ever get a JP1 remote and cable, I found a match and recorded the IR signals with the JP1 tools to create the respective files.
And although, I couldn't find P+ or P- commands, I suspect they are listed as the SkipFoward and SkipBackward on the LHD.
Code: | Archive : Protocol=NEC1 Device=0.23 OBC=111 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94
Option+ : Protocol=NEC1 Device=0.23 OBC=66 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94
SkipBackward : Protocol=NEC1 Device=0.23 OBC=102 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94
SkipForward : Protocol=NEC1 Device=0.23 OBC=103 (Pronto from decode)
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94
|
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|