JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

maxtone dvd-mt800

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
chuliu



Joined: 04 Dec 2010
Posts: 280
Location: Hong Kong

PostPosted: Wed Feb 01, 2012 5:03 am    Post subject: maxtone dvd-mt800 Reply with quote

Hi
Please help find code for maxtone dvd-mt800.

1. Device:dvd
2. Type of device:dvd
3. Year:2011
4. JP1/UEI Remote model:urc-8820b00
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? no
9. Partially working setup code? no
10. Learning remote question? yes
11. Have you tried the JP1 Lookup Tool? no

Thanks.


Last edited by chuliu on Wed Feb 01, 2012 10:02 am; edited 1 time in total
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6952
Location: Florida

PostPosted: Wed Feb 01, 2012 6:14 am    Post subject: Reply with quote

urc-8620b00 Question

I can't seem to find any reference to this remote.

Since it isn't a learner, have you tried a code search to find a partially working code?
Back to top
View user's profile Send private message Visit poster's website
chuliu



Joined: 04 Dec 2010
Posts: 280
Location: Hong Kong

PostPosted: Wed Feb 01, 2012 10:03 am    Post subject: Reply with quote

Hi

Sorry It was my oversight.
It is actually URC-8820
and is a learning remote.
jp1 programable.
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Wed Feb 01, 2012 1:17 pm    Post subject: Re: maxtone dvd-mt800 Reply with quote

chuliu wrote:
maxtone dvd-mt800.
4. JP1/UEI Remote model:urc-8820

I couldn't find a match. The MAXTONE RMDVD-838 was the closest I could find. Recorded its IR signals with the JP1 tools to create the respective files.

_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 280
Location: Hong Kong

PostPosted: Thu Feb 02, 2012 10:50 am    Post subject: Reply with quote

I use the irwidget I bought and irscope to learn the remote and was able to program the urc-8820 to control the maxtone dvd by adding the obc code one by one to the buttons tab in the rm. And from there I used ir to program the urc 8820.

I wonder if I can share the ict file to the file section. I am not sure if the format of my ict is consistent with what you have.

Let me know.
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Thu Feb 02, 2012 11:00 am    Post subject: Reply with quote

chuliu wrote:
I use the irwidget I bought and irscope to learn the remote and was able to program the urc-8820 to control the maxtone dvd by adding the obc code one by one to the buttons tab in the rm. And from there I used ir to program the urc 8820.

I wonder if I can share the ict file to the file section. I am not sure if the format of my ict is consistent with what you have.

Let me know.

The ICT file from IR Scope should be the same no matter which version you have. I can take a look at it if you'd like. But, please do share your ICT and RMDU files with us. Put the ICT file in the Diagnostic section and your RMDU in the the DVD section. That way the entire community may benefit from it.
_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Thu Feb 02, 2012 11:10 am    Post subject: Reply with quote

chuliu wrote:
I use the irwidget I bought and irscope to learn the remote and was able to program the urc-8820 to control the maxtone dvd by adding the obc code one by one to the buttons tab in the rm.

Btw, there's a trick if you have a spreadsheet application and it is very helpful if you supply the names in the notes. Open up IR Scope > File > Summary (Ctrl+Y)> then go to the last learn and highlight up to the column headers and press [Control]+[C] to copy into your clipboard. Then inside your spreadsheet app, press [Control]+[V] paste. This will allow you to adjust your columns appropriately. I usually cut the OBC row and insert them next to the notes.

Inside RM press Clean Up and then New. Move columns appropriately like the spreadsheet. I normally just move the OBC column beside the Name. Then inside the spreadsheet highlight and copy the notes and the OBC. Go into RM, click once on the first column and row to highlight it then right click on it and select paste. Now all of your learns should propagate accordingly.
_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
eferz
Expert


Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas

PostPosted: Thu Feb 02, 2012 1:43 pm    Post subject: Reply with quote

chuliu wrote:
I use the irwidget I bought and irscope to learn the remote and was able to program the urc-8820 to control the maxtone dvd by adding the obc code one by one to the buttons tab in the rm. And from there I used ir to program the urc 8820.

I wonder if I can share the ict file to the file section. I am not sure if the format of my ict is consistent with what you have.

Let me know.

I've juxtaposed the values of our ICT files. Except for a few missing commands, the two would be the exact same upgrade. This is good to know for future reference. Thanks.

Your commands are in light green where mine are in light red btw.
_________________
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central