Pioneer DVR-545H DVD/HDD recorder

[denooij]

Only a few weeks ago I started using the JP1 connector of my remote and I love it. I installed already a few pieces of equipment with modified device upgrades on my OFA remote. But I'm stuck now with the pioneer upgrade.

1. Device: Pioneer DVR545H (original remote VXX3129)
2. Type of device: DVD/HDD recorder
3. Year: 2006
4. JP1/UEI Remote model: URC-5550 topline
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
dload.php?action=file&file_id=3397
or
dload.php?action=file&file_id=3258
10. Learning remote question? N/A

With two device setups (pioneer DVR630H and pioneer 540HX-S and similar others) I have partial success. Both device upgrades have some functions working, what works at the first, does not work at the other.
Both device upgrades use the pioneer-mix protocol with device1: 171 and device2: 175. CMD1 is 44 and cmd2 is 42 for the one upgrade, while the other has these two values swapped resulting in different fixed data.
The commands I could not detect (yet) in both sets are the transport commands (play, stop, next, prev etc). I expect these are mostly single style commands.
As I am relatively new to JP1 programming I do not know how to combine these two device upgrades to one. I have already made some successful device upgrades but these pioneer codes seem crazy complicated.
If it could help, I have a document containing the commands I found up till now.

Thanks for the help,
Michel.

[eferz]

1. Device: Pioneer DVR545H (original remote VXX3129)
4. JP1/UEI Remote model: URC-5550 topline

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10485
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10486