codes for Samsung LN40A550 (component1 - HDMI2 etc.) macro

[radunn]

I need macro codes for the OFA-9910 remote for Samsung TV (LN40A550). Currently OFA's M1 key turns on the TV and cable box; this works. I want a code that will set the TV to Component1 when using Macro M1 key. RemoteMasters' function tab lists component1 as: EFC-190, OBC-134, HEX-9E.

I also want to do the same thing for M3 key (TV, DVD player); enabling TV to switch to HDMI2. Please advise me how to achieve this or if it cannot be done.... ok. In advance thanks

[eferz]

I need macro codes for the OFA-9910 remote for Samsung TV (LN40A550). Currently OFA's M1 key turns on the TV and cable box; this works. I want a code that will set the TV to Component1 when using Macro M1 key. RemoteMasters' function tab lists component1 as: EFC-190, OBC-134, HEX-9E.

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10335
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10336

I also want to do the same thing for M3 key (TV, DVD player); enabling TV to switch to HDMI2. Please advise me how to achieve this or if it cannot be done.... ok. In advance thanks

I suspect the easy way to do this is to use either IR or RMIR to customize your own macros. Not sure how you'd do it without the cable or tools though.

[radunn]

I need macro codes for the OFA-9910 remote for Samsung TV (LN40A550). Currently OFA's M1 key turns on the TV and cable box; this works. I want a code that will set the TV to Component1 when using Macro M1 key. RemoteMasters' function tab lists component1 as: EFC-190, OBC-134, HEX-9E.

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10335
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10336

I also want to do the same thing for M3 key (TV, DVD player); enabling TV to switch to HDMI2. Please advise me how to achieve this or if it cannot be done.... ok. In advance thanks

I suspect the easy way to do this is to use either IR or RMIR to customize your own macros. Not sure how you'd do it without the cable or tools though.

Thank you for the post(s); someone made a file for me a while ago but I will check this out... again, thanks!

p.s. what app opens ICT files?

[eferz]

Thank you for the post(s); someone made a file for me a while ago but I will check this out... again, thanks!

p.s. what app opens ICT files?

You're welcome. Glad to help. IR Scope creates and opens ICT files.