Page 1 of 1
EEPROM part # from mouser?
Posted: Mon Dec 22, 2003 1:24 pm
by Garret
Does anyone have the Mouser part number for a 2k EEPROM for a 6131? I would just order from Rob, but Mouser is only about 5 minutes from my house and I just pick up via 'will call'.
thanks,
Garret
Posted: Mon Dec 22, 2003 2:14 pm
by usblipitor
as long as we are asking for part numbers, I wouldn't mind knowing the part number for the 6 pin header.
Posted: Mon Dec 22, 2003 3:34 pm
by jamesgammel
Steve,
You probably won't find one for a 6 pin. All a 6 pin header is is three sections broke off a dual 20. One will thus make 6 6-pin headers and a leftover 4 pin "junk".
Jim
Posted: Mon Dec 22, 2003 4:10 pm
by Mark Pierson
The one that I've used in the past is made by Atmel and the Mouser P/N is
556-AT24C16N10SI2.7, but it appears to be out of stock.
Posted: Mon Dec 22, 2003 5:38 pm
by The Robman
This EEPROM should do the trick...
698-CAT24WC16JI-1.8
For the 6-pin, you should get this part:
517-836-01-36, it's a 72 pin strip of breakaway header, which means you can make 12 6-pin connectors out of it.
Thank you!
Posted: Tue Dec 23, 2003 7:47 am
by Garret
Thanks for the help.
Garret
EEPROM
Posted: Sun Dec 28, 2003 2:07 pm
by mstokley
The Robman wrote:This EEPROM should do the trick... 698-CAT24WC16JI-1.8
For the 6-pin, you should get this part: 517-836-01-36, it's a 72 pin strip of breakaway header, which means you can make 12 6-pin connectors out of it.
Is the eeprom listed by Rob only for the 6131 or is ok for the 8011 & 6012 as well - Thanks
Posted: Sun Dec 28, 2003 2:14 pm
by usblipitor
It should be ok for those remotes as well. But why aren't you buying the eeprom from Rob? Cheaper, faster, better...