JP1 Remotes

1. Device: Epson EMP-7250
2. Type of device: Projector
3. Remote model: UCR-7552
4. JP1 user? yes
5. Still have original remote? no
6. Checked Yahoo file section? yes
7. Checked Pronto file section (at R/C)? yes


I'm looking for ir codes for my projector. Unfortunately ís the original remote defect.

Thanks,
Sebastian

You should try the codes for the EMP710 from RC. Even though the model number isn't the same there is a decent chance that the IR codes are the same.

You can create a device upgrade for RC6 protocol, device 42 with a few OBC codes for a simple test.

A few OBCs from that file are

82 Menu
16 Vol+
12 Power

If any of those work you can use DecodeCCF on the original file to get the rest of the OBC numbers.

Here's a link to the EMP710 ccf file

I found a Powerlite 7250 in the Aurora IR library and created a device upgrade
It looks like the same picture and I think the units are marketed as Powerlite-XXXX in North America and EMP-XXXX elsewhere.

The IR protocol is a quad with 46 data bits including a checkbyte that I didn't try to decode since I was using PB. The cursor keys will require a different protocol/device upgrade, but try it and if it works for most of the the commands in the upgrade. If it works, I'll do the rest.

Thank you very much. The Powerlite 7250 really seams to be the EMP 7250. I thinks it´s the European model. But unfortunately I am not able to test it at the moment. Look at
https://www.hifi-remote.com/forums/viewtopic.php?t=3148

Greetings,
Sebastian