JP1 Remotes

I have a Lasko column fan with a flimsy little IR remote. Signals are learnable on my 2116, but don't decode as anything in IR502. They seem pretty simple, but what do I know.

It only has 4 buttons (don't remember which of these does which, but I can provide that information if it's helpful)

All data below appears in the "Sent Repeatedly While Key is Behing Held" section. "Sent Once When Key is Pressed" and "Sent Once Upon Completion of Other Bursts" are both empty.

Frequency 37914

Button 1
+1266 -426 +1266 -426 +422 -1270 +1266 -426 +1266 -426 +422 -1270 +422 -1270 +422 -1270 +422 -1270 +422 -1270 +422 -1270 +1266 -7200

Button2
+1266 -426 +1266 -426 +422 -1270 +1266 -426 +1266 -426 +422 -1270 +422 -1270 +1266 -426 +422 -1270 +422 -1270 +422 -1270 +422 -8044

Button 3
+1266 -426 +1266 -426 +422 -1270 +1266 -426 +1266 -426 +422 -1270 +422 -1270 +422 -1270 +422 -1270 +422 -1270 +1266 -426 +422 -8044

Button 4
+1266 -426 +1266 -426 +422 -1270 +1266 -426 +1266 -426 +422 -1270 +422 -1270 +422 -1270 +1266 -426 +422 -1270 +422 -1270 +422 -8044


Is it possible some enterprising person can turn this into a protocol/upgrade?

Thanks in advance,
Adam

Here ya go:

Upgrade Code 0 = 6F CF (Cable/1999)
91 00 81 D8 00 04 40 08 20 00 00 00 00 00
End

Upgrade Protocol 0 = 01 91 (S3C8+)
3D 92 11 8B 14 C5 11 06 06 02 79 00 C1 00 D5 02
65 34 E3 FF FF FF FF FF 03 8D 01 46
End


KM and PB files are here

BTW there is an activation fee of $100 -- you did say enterprising, right

jon_armstrong wrote:BTW there is an activation fee of $100 -- you did say enterprising, right

And don't forget, I'll be needing my taste too!

I did open my mouth, didn't I?

That worked like a charm, thank you very much. PayPal is in the mail!

Adam

Hey Adam,
Could you confirm what each of the 4 codes you posted actually do (and how the original buttons are labelled) so we can make an official upgrade for this.

Sure. As they are assigned in the KM file that Jon posted:

1 - Power on/off
2 - Oscillate on/off
3 - Fan Speed
4 - Timer

They are labeled with some goofy icons on the original remote.

Adam

I'd like to add an upgrade for a Lasko Heater to a JP1.2 Comcast 1067.

The learned signals are in this file.
https://www.hifi-remote.com/forums/dload ... le_id=5174

Here is some work done by the late Jon Armstrong, but the files in the links don't exist.
https://www.hifi-remote.com/forums/viewt ... ight=lasko

I'd love to learn how to do this, but for some reason this seems to be just outside my grasp.

See if this works. It is just a quick HCS08 port of Jon Armstrong's S3C8 work & I did not have time to test it. The file linked in the old post has been moved to the JP1 files section here.

Thanks Mike