JP1 Remotes

1. Device: TVPad 4 M418 GCN
2. Type of device: TV Set top Box
3. Year: 2014
4. JP1/UEI Remote model: n/a
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TVPad 2 M233
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
12. If you have a Nevo (or similar) remote, have you tried ez-rc.com? n/a

I have tried TVPad 2 M233 remote code on TVPad 4
( https://www.hifi-remote.com/forums/dload ... e_id=12111 )

It works good except the button being press twice when I press
eg. when I press the right button in Sling remote, TVPad 2 will recognize 1 press to right
but TVPad 4 will recognize 2 presses to right

Besides, I also have a Logitech Harmony and TVPad 4 M418 is supported

Hope that someone can help me to create a PL bin file for TVPAD 4 M418

Thanks alot.

Here you go

https://www.hifi-remote.com/forums/dload ... e_id=13932

alanrichey wrote:Here you go

https://www.hifi-remote.com/forums/dload ... e_id=13932

Thanks Alan

Working Great!!

RE: For other users using this file
The "exit" button is mapped to "Last Channel"

Thanks for the feedback. I can always change it if you like

alanrichey wrote:Thanks for the feedback. I can always change it if you like

Thanks Alan

If you can change the "Last Channel" mapping back to "Exit" that would be awesome!!

OK, I am not sure what to do here. As far as I am aware the Exit button is mapped to Exit and the Last_Channel is mapped to Last_Channel, all as defined on the Logitech Harmony database.

So what am I supposed to do ? Swap them over ?

I thought he saying that the code that you assigned to the LAST CH button is actually the "Exit" function, but now that I look at your RM file, I see that you haven't programmed anything to the LAST CH button, so it must be the other way around, he must be saying that the code that you programmed to the EXIT button is actually the "Last Ch" function.

Given that LAST CH is often labeled as "Back" on remotes, you could see how the Harmony folks could have got it mixed up.

Hi Rob.. Not sure which RM file you are looking at as I haven't actually uploaded it yet. I just checked by importing the BIN file and it definitely has both buttons mapped.

Oh, I just did a search for TVPad and thought those were the files.