JP1 Remotes

Posted: **Tue Oct 21, 2014 1:28 pm**

i m trying to understand whi my remote is acting in a strange way...

i have added a device (vu+ duo) and is working perfectly
but when i press the MENU button many keys are not working anymore
to have it working again i have to press device button (in my case SAT) and then
the key i want to use

for example... i want to enter menu and press ok i can't
i have to press menu, then press SAT and then ok (cause ok isnt working after pressing menu)

this is my configuration

https://www.dropbox.com/s/xuybnq4985ijv ... io.ir?dl=0

thanks anyone for help

Posted: **Wed Oct 22, 2014 12:18 am**

There is MENU mode in URC-7560.
When you enter it (by pressnig MENU button) MUTE button is OK button, and AV is EXIT.

c/p from manual:

Code: Select all

Important notes:
- To exit out of Menu, simply press the Menu key again.

-  If on the original remote control you had to press an ”Exit” key
to exit the Menu, this function may be found on the AV key 
during Menu control.

- Menu will cancel automatically if a key is not pressed within 20
seconds.

-  If your orginal remote required you to press an “OK” or “ENTER”
key, this function can be found under the Mute key during Menu
control.

Posted: **Wed Oct 22, 2014 3:35 am**

so i have to bind menu key to another key?

or can ust shift-menu ? to avoid menu mode...

Posted: **Wed Oct 22, 2014 5:48 am**

Or you can cancel menu mode by programming the same function on MUTE and OK buttons, and the same function on AV and EXIT buttons.

Posted: **Wed Oct 22, 2014 7:56 am**

damir wrote:Or you can cancel menu mode by programming the same function on MUTE and OK buttons, and the same function on AV and EXIT buttons.

sorry for my ignorance, can you explain better? Can i disiable menu mode ?

to program ok button on mute button in menu mode... i have to do tath with 99x program mode? or with software?

or you are talking about the stuff in red ?

Posted: **Wed Oct 22, 2014 3:23 pm**

With Remote Master

Posted: **Wed Oct 22, 2014 5:58 pm**

thanks friends!

problem fixed

JP1 Remotes

help with my old urc-7560! :P

help with my old urc-7560! :P

hum

thanks