JP1 Remotes

hopefully someone can help, im trying to find a code for sky+ Version2 that will work with OFA 7560

Do you have a JP1 cable?

The 7560 is a learning remote, so you could learn a few signals, download to IR.EXE and decode them. With decode information from those signals, we can tell you how to program the 7560.

There have been plenty of discussions here of the Sky devices that use RC6-6-20 protocol, device 0, and subdevice 0 or 12. I think the 7560 has setup codes for both of those, which would be mentioned in some of those threads.

I have no idea whether "sky+" is different from the "sky" that has been discussed here, nor what "version2" indicates. That's why a decode of a learned signal is so much more informative than a description of the device.

The code for Sky+ for OFA remotes is 1175, Normal Sky is 847. There is no difference between V1 and V2 Sky+ boxes as far as the remote goes.

finally after a long break i've found the time to sit down and work it out.
thanks for the help here and in the rest of these forums