JP1 Remotes

Posted: **Fri May 24, 2013 6:20 pm**

New to the forum, I downloaded and set up RM according to the readme. After setup, when I go main part of the program "Download from the attached remote" and "Upload to the attached remote" is greyed out. I verified that the cable drivers were installed correctly.

The cable works correctly in IR.exe, I'm able to download from the remote.

The cable I purchased: http://www.ebay.com/itm/220928927565?ss ... 1497.l2649

I found that the cable is a prolific usb to serial converter. I downloaded the drivers from prolific that came with a chip version checker. It says "This is a PL-2303 XA / HXA chip.

Also when searching for a solution I found some people saying to set it to jp1.x cable in RM but I don't see an option anywhere to set the cable.

The two remotes I'm trying to use: Atlas OCAP and RCA RCRP05BR

Edit: I looked at the package closer and it is actually the cable sold by diygadget.com. I can't figure out why I can't get it to work on RM.

Posted: **Fri May 24, 2013 7:50 pm**

To set the cable, go to Remote - Interface.

Posted: **Fri May 24, 2013 8:03 pm**

For some reason I'm not seeing interface as an option.

Here is a screenshot:

I'm hoping it is something simple, I just can't figure it out.
Thank you

Posted: **Fri May 24, 2013 8:15 pm**

Hmm... what version does it show in About?

Posted: **Fri May 24, 2013 8:19 pm**

v2.02

Edit: I tried v1.98 and it is the same thing, no option to select interface

Posted: **Fri May 24, 2013 10:14 pm**

In Help About, I see:
RemoteMaster v2.02a
-----------
DecodeIR version 2.44
Interfaces:
JP1.X Serial version 0.19
JP1 USB version 0.031
JP1 Parallel version 0.02
System Properties:
java.version = "1.7.0_21"
java.vendor = "Oracle Corporation"
os.name = "Windows XP"
os.arch = "x86"

Do you also see each of the 3 JP1 entries? Also, rmaster.err contains a lot of messages about the progress of RMIR. Do you see any exceptions, or failures associated with the cable interfaces? If you have any question, upload the err file to the Diagnostics Area, and post a link to it here.

Posted: **Fri May 24, 2013 10:32 pm**

I don't see those entries:

But under rmaster.err I do see it's not loading the dlls:

Code: Select all

Loading C:\Program Files (x86)\RM\Windows\jp12serial.dll
Unable to create JP12Serial object: C:\Program Files (x86)\RM\Windows\jp12serial.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Loading C:\Program Files (x86)\RM\Windows\jp1usb.dll
Unable to create JP1USB object: C:\Program Files (x86)\RM\Windows\jp1usb.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Loading C:\Program Files (x86)\RM\Windows\jp1parallel.dll
Unable to create JP1Parallel object: C:\Program Files (x86)\RM\Windows\jp1parallel.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Loading C:\Program Files (x86)\RM\Windows\DecodeIR.dll
DecodeIR JNI interface not found!
Loading C:\Program Files (x86)\RM\Windows\DecodeIR.dll

I'm running 64bit windows 7 ultimate

Posted: **Fri May 24, 2013 10:52 pm**

Is RM IR 32bit only?

Posted: **Fri May 24, 2013 11:09 pm**

I'm not sure how you ended up with RMIR 2.02. You should be using 2.02a.

From the release notes for 2.02a
* Upgrade to DecodeIR 2.44 (with suppport for 64-bit Java on 64-bit Windows)
* Upgrade to JP12Serial 0.19 (with support for 64-bit Java on 64-bit Windows)

Posted: **Sat May 25, 2013 4:43 pm**

Upgrading to 2.02a fixed it, thank you.

Posted: **Wed Sep 18, 2013 5:12 pm**

3FG wrote:I'm not sure how you ended up with RMIR 2.02. You should be using 2.02a.

I got caught by the same problem. It turns out that the RemoteMaster webpage has not been updated to point to 2.02a. The link next to "Latest version" on the page http://controlremote.sourceforge.net/ goes to 2.02 rather than 2.02a.

Posted: **Thu Sep 19, 2013 7:14 am**

Fixed

mrichmon wrote:I got caught by the same problem. It turns out that the RemoteMaster webpage has not been updated to point to 2.02a. The link next to "Latest version" on the page http://controlremote.sourceforge.net/ goes to 2.02 rather than 2.02a.

Posted: **Thu Sep 19, 2013 7:14 am**

Fixed

mrichmon wrote:I got caught by the same problem. It turns out that the RemoteMaster webpage has not been updated to point to 2.02a. The link next to "Latest version" on the page http://controlremote.sourceforge.net/ goes to 2.02 rather than 2.02a.

JP1 Remotes

Remotemaster will not let me download from remote.

Remotemaster will not let me download from remote.