Page 1 of 1
Cable layout on stripboard.
Posted: Sat Sep 12, 2009 11:29 am
by swazz99jhb
Hi
Can someone please double check the stripboard layout and advise if all is correct.
https://www.hifi-remote.com/forums/dload ... le_id=7226
Regards
Posted: Sat Sep 12, 2009 2:27 pm
by WagonMaster
Hi!
I see only 1 problem with your layout. The base of Q1 isn't connected to anything! You need to connect it to that D1/R5 junction, which could easily be done with a simple jumper wire between strip 'a' and strip 'b', e.g. at point #14 or #15.
Hope that helps! Good luck!
P.S. I like your diagram and would appreciate your re-posting the corrected version if you can, so that I can refer others to it in the future.
Regards,
Bill
Posted: Sun Sep 13, 2009 1:44 am
by swazz99jhb
Thanx. I've uploaded the new image. I moved R5, D1 and the Tx wire to strip b, thus less soldiering.