Page 1 of 1
Humax YS-4000
Posted: Mon Sep 07, 2020 4:06 am
by pjevs
Hi,
I have a Humax YS-4000 and cannot find a bin thats works.
Any idea which Humax bin file will be compatible to control Humax YS-4000
I have Slingbox M1
Posted: Tue Sep 08, 2020 1:42 am
by alanrichey
I couldn't find the YS-400 but I did find a CS-4000. This uses the standard Humax iR setup. I would try this one
https://www.hifi-remote.com/forums/dload ... e_id=11298. Make sure you follow the installation instructions in the README file.
Posted: Sun Oct 11, 2020 10:13 am
by pjevs
I have tried the file and the it do not work.
The S1277_PL does not work and when select the S1277_RV I cannot continue.
Posted: Sun Oct 11, 2020 10:35 am
by The Robman
pjevs wrote:I have tried the file and the it do not work.
Please read this...
https://www.hifi-remote.com/forums/viewtopic.php?t=17119
Posted: Sun Oct 11, 2020 11:25 am
by pjevs
I have read this. And I have tried it all.
And it comes with this error when I try to use S1277_RV.bin
"Invalid custom bin file, click here for more help."
Posted: Sun Oct 11, 2020 12:30 pm
by alanrichey
You don't appear to following the instructions linked to in the readme file, so please do that and try again.
Posted: Mon Oct 12, 2020 3:54 am
by pjevs
alanrichey wrote:You don't appear to following the instructions linked to in the readme file, so please do that and try again.
I have followed the instruction.
The box is a Humax YSR-4000 from Yousee in Denamrk
I have a Slingbox M1
I have installed the file S1277_Pl.bin as recommended and after the setup the buttons do now work.
I have experimented with the placement of the IR Blaster and the box works with the remote.
I have reset the Slingbox and tried again.