Page 1 of 3
366001 Insignia NS-RMT415 version 2
Posted: Thu Jan 02, 2020 9:48 pm
by jeajea
I purchased an Insignia NS-RMT415 on Ebay.
It looks like the one sold by Best Buy.
However, the signature blink back is 36601.
The label indicates (battery compartment)
URC67100BC1-002-R
Rmir download fails
No RDF matches signature starting 3660
Raw download works
I tried copying the 358403 NS-RMT415 RDF and saving it as 36601 but
apparently should be six digits/and or the signature is also needed
inside the file.
Rmaster.err file
Code: Select all
RemoteMaster v2.09 build 8
Incorporates IrpTransmogrifier v1.2.2
Legacy merge set = true
System Properties:
java.version = 1.8.0_231
java.vendor = Oracle Corporation
os.name = Windows 10
os.arch = x86
java.home = C:\Program Files (x86)\Java\jre1.8.0_231
java.class.path = D:\RM209\RemoteMaster.jar
Loading protocols from 'D:\RM209\protocols.ini'
Option to include Slingbox protocols is Off
libraryFolder=D:\RM209\Windows-x86
LibraryLoader: Attempting to load 'jp12serial' from 'D:\RM209\Windows-x86\jp12serial.dll'...
LibraryLoader: Loaded 'jp12serial' successfully from 'D:\RM209\Windows-x86\jp12serial.dll'
JP12Serial version 0.24
LibraryLoader: Attempting to load 'hidapi' from 'D:\RM209\Windows-x86\hidapi.dll'...
LibraryLoader: Loaded 'hidapi' successfully from 'D:\RM209\Windows-x86\hidapi.dll'
CommHID version 1.0
Loading internal library JP2BT
JP2BT version 1.1
LibraryLoader: Attempting to load 'jp1usb' from 'D:\RM209\Windows-x86\jp1usb.dll'...
LibraryLoader: Loaded 'jp1usb' successfully from 'D:\RM209\Windows-x86\jp1usb.dll'
JP1USB version 0.04
Loading internal library JPS
JPS version 0.1
LibraryLoader: Attempting to load 'jp1parallel' from 'D:\RM209\Windows-x86\jp1parallel.dll'...
LibraryLoader: Loaded 'jp1parallel' successfully from 'D:\RM209\Windows-x86\jp1parallel.dll'
JP1Parallel version 0.12
JP1Parallel InpOutDriver is not open
*** To use the parallel port interface, RMIR must be run once as adminstrator.
This enables it to install the InpOut driver, a once-only task needed for
the interface to access the port.
Using DecodeIR to decode Learned Signals
DecodeIR: Looking in 'D:\RM209'.
LibraryLoader: Attempting to load 'DecodeIR' from 'D:\RM209\Windows-x86\DecodeIR.dll'...
LibraryLoader: Loaded 'DecodeIR' successfully from 'D:\RM209\Windows-x86\DecodeIR.dll'
Using IrpTransmogrifier as decoder of learned signals
Starting normal download
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM4
Opened on Port COM4
Opened interface type 1
Interface opened successfully
Base address = $EC00
Searching for RDF
Final signature sought = 3660
No matching RDF found
RemoteMaster.windowClosing() entered
has button APPS instead of wide
Posted: Thu Jan 02, 2020 10:57 pm
by The Robman
Hey Jim, I will help you with this. First things first, save the raw download and post it here in the Diagnosis Area. Then, see if the remote supports macros. If it does, start creating macros that include all of the buttons. I would suggest using the 4 color buttons to hold the macros. Once you captured all the buttons in macros, post those RMIR raw download files too.
I will PM you for some additional tasks.
Links to raw and jp2 dumps
Posted: Fri Jan 03, 2020 9:18 am
by jeajea
Link to raw dump
https://www.hifi-remote.com/forums/dload ... e_id=25790
I thought I was buying a remote not yet another DIY project.
Posted: Fri Jan 03, 2020 11:06 am
by The Robman
Here's a starter RDF, but I'll need that macro exercise completed in order to get the button codes in there.
https://www.hifi-remote.com/forums/dload ... e_id=25792
Link to raw dump with macros on red, green, yellow, blue.
Posted: Fri Jan 03, 2020 12:56 pm
by jeajea
Link to raw dump with macros on red, green, yellow, blue.
https://www.hifi-remote.com/forums/dload ... e_id=25793
Yellow is supposed to be the numbers but doesn’t appear to send anything.
I don’t know how to add phantom and dev buttons to a macro.
Posted: Fri Jan 03, 2020 1:35 pm
by The Robman
Thanks, I'll take a look.
I don't need you to do Phantoms, because Phantoms aren't "real", they're just gaps in the button codes that you find. There's nothing special about device buttons though, so you add them in the same way you would any other buttons.
Posted: Fri Jan 03, 2020 2:46 pm
by The Robman
I forgot to mention, I need you to list what each button in the macros are.
In case it helps, here's a list of the buttons in the approximate order they appear on the remote:
Power
Setup
TV
DVD
STB
STREAM
Menu
Info
Guide
Exit
Up
Down
Left
Right
OK
Red
Green
Yellow
Blue
Stop
List
Rec
Rew
Play
FFwd
Replay
Pause
Skip
Vol+
Vol-
Last
Mute
Ch+
Ch-
1
2
3
4
5
6
7
8
9
Dash
0
Enter
VOD
Home
PageUp
Live
Input
Opt
PageDown
Wide
Link to NEW raw dump with macros on red, green, yellow, blue
Posted: Fri Jan 03, 2020 3:42 pm
by jeajea
Link to NEW raw dump with macros on red, green, yellow, blue.
https://www.hifi-remote.com/forums/dload ... e_id=25794
Code: Select all
red:
Power
TV
DVD
STB
STREAM
Menu
Info
Guide
Exit
green:
UP
LEFT
OK
RIGHT
DOWN
STOP
LIST
RECORD
REW
PLAY
FFW
PREV
PAUSE
NEXT
YELLOW:
1
2
3
4
5
6
7
8
9
-
0
ENTER
BLUE:
VOL+
LAST
CH+
VOL-
MUTE
CH-
VDO
HOME
PAGEUP
LIVE
INPUT
OPT
PAGEDOWN
APPS
Posted: Fri Jan 03, 2020 5:09 pm
by The Robman
That's great. The only button you didn't capture was the SETUP button, but I was able to guess at that. This version of the RMT415 appears to only have 1 phantom device mode and it's an audio mode. I have included it in the RDF, so please test whether it really works. Otherwise, I think this RDF is complete, so play with it and see if you find any problems.
https://www.hifi-remote.com/forums/dload ... e_id=25792
Download aborting due to incomplete read
Posted: Fri Jan 03, 2020 5:43 pm
by jeajea
I am getting
Download aborting due to incomplete read
Also how many devices does this remote support (4, 5, 8 or ?)
The rdf for the other version appears to show eight.
I don’t think you can put setup in a macro using 995.
Code: Select all
RemoteMaster v2.09 build 8
Incorporates IrpTransmogrifier v1.2.2
Legacy merge set = true
System Properties:
java.version = 1.8.0_231
java.vendor = Oracle Corporation
os.name = Windows 10
os.arch = x86
java.home = C:\Program Files (x86)\Java\jre1.8.0_231
java.class.path = D:\RM209\RemoteMaster.jar
Loading protocols from 'D:\RM209\protocols.ini'
Option to include Slingbox protocols is Off
libraryFolder=D:\RM209\Windows-x86
LibraryLoader: Attempting to load 'jp12serial' from 'D:\RM209\Windows-x86\jp12serial.dll'...
LibraryLoader: Loaded 'jp12serial' successfully from 'D:\RM209\Windows-x86\jp12serial.dll'
JP12Serial version 0.24
LibraryLoader: Attempting to load 'hidapi' from 'D:\RM209\Windows-x86\hidapi.dll'...
LibraryLoader: Loaded 'hidapi' successfully from 'D:\RM209\Windows-x86\hidapi.dll'
CommHID version 1.0
Loading internal library JP2BT
JP2BT version 1.1
LibraryLoader: Attempting to load 'jp1usb' from 'D:\RM209\Windows-x86\jp1usb.dll'...
LibraryLoader: Loaded 'jp1usb' successfully from 'D:\RM209\Windows-x86\jp1usb.dll'
JP1USB version 0.04
Loading internal library JPS
JPS version 0.1
LibraryLoader: Attempting to load 'jp1parallel' from 'D:\RM209\Windows-x86\jp1parallel.dll'...
LibraryLoader: Loaded 'jp1parallel' successfully from 'D:\RM209\Windows-x86\jp1parallel.dll'
JP1Parallel version 0.12
JP1Parallel InpOutDriver is not open
*** To use the parallel port interface, RMIR must be run once as adminstrator.
This enables it to install the InpOut driver, a once-only task needed for
the interface to access the port.
Using DecodeIR to decode Learned Signals
DecodeIR: Looking in 'D:\RM209'.
LibraryLoader: Attempting to load 'DecodeIR' from 'D:\RM209\Windows-x86\DecodeIR.dll'...
LibraryLoader: Loaded 'DecodeIR' successfully from 'D:\RM209\Windows-x86\DecodeIR.dll'
Using IrpTransmogrifier as decoder of learned signals
Starting normal download
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM4
Opened on Port COM4
Opened interface type 1
Interface opened successfully
Base address = $EC00
Searching for RDF
Final signature sought = 366001
Remote identified as: Insignia NS-RMT415 v2
Number of bytes read = $FFFFFFFF
Ending normal download
Download aborting due to incomplete read
Re: Download aborting due to incomplete read
Posted: Fri Jan 03, 2020 5:55 pm
by The Robman
jeajea wrote:I am getting: Download aborting due to incomplete read
That's a new one for me, I have no idea. Obviously, all I can do here is open the .ir files that you post, I can't test it with the remote. Have you tried opening the .ir files that you created with it?
jeajea wrote:Also how many devices does this remote support (4, 5, 8 or ?)
The rdf for the other version appears to show eight.
Yeah, like I said above, I only found 1 phantom device in this one, not 4 like in the previous version.
jeajea wrote:I don’t think you can put setup in a macro using 995.
Hmm, maybe it's restricted in this remote then, because it's allowed in most of the others. That's how non-JP1 users would put a shifted key in a macro.
Posted: Fri Jan 03, 2020 6:09 pm
by jeajea
Other than the raw dumps I don’t have any ir files for this remote.
The instructions say to use the setup key at the end of the macro. That is
how I created the macros.
6. TAP "SETUP" and wait for two blinks - RELEASE.
https://www.hifi-remote.com/forums/viewtopic.php?t=11675
I tried a 981 reset
Posted: Fri Jan 03, 2020 6:38 pm
by jeajea
I tried a 981 reset – only get one long blink
980 reset blinks four times
Posted: Fri Jan 03, 2020 7:27 pm
by The Robman
The .ir files that I'm talking about are the raw dumps, ie, the original one and the ones with macros.
You do indeed press and hold SETUP to end a macro, but you can also use it as a regular button in a macro. I just verified it on a couple of my remotes just to prove I wasn't imagining it. But it's no matter, there was only 1 button code missing, so that must have been the SETUP code button.
Now that you've done a master reset, try downloading from the remote again (ie, using the RDF).
I get the same error after both 981 and 980 resets.
Posted: Fri Jan 03, 2020 7:49 pm
by jeajea
I get the same error after both 981 and 980 resets.
FYI: I got the same error with the “starter” RDF.