Daikin "Aircon" a/c FTXS20CVMB (remote ARC433A1)

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
Barf
Expert
Posts: 1522
Joined: Fri Oct 24, 2008 1:54 pm
Location: Munich, Germany
Contact:
Contact Barf

Post by Barf »

Ooops. I see that there IS an issue if you have "only" one GlobalCache on your LAN ... :oops: A work-around is to connect another GC to your LAN, and possibly switch back and forth (the second one need not be one with learning capacity, a GC-100-* will do). Of course, this is not an acceptable work-around for most people....

I'll come back with a better work-around and/or a bugfix shortly.

Again, sorry for this.
Top
kevincanon
Posts: 7
Joined: Sat Jan 18, 2014 10:06 am

Post by kevincanon »

Barf wrote:Ooops. I see that there IS an issue if you have "only" one GlobalCache on your LAN ... :oops: A work-around is to connect another GC to your LAN, and possibly switch back and forth (the second one need not be one with learning capacity, a GC-100-* will do). Of course, this is not an acceptable work-around for most people....

I'll come back with a better work-around and/or a bugfix shortly.

Again, sorry for this.
Hi Barf, Successfully captured IR codes, used two GC flex, but no luck in using the codes. Captured Codes doesn't work with GC, it even doesnt transmit(LED on GC flex doesnt glow when sending command).
Any help?

Below are the captured codes
ON :
sendir,1:3,1,38000,1,441,77,120,5,61,5,28,1,32,1,32,1,65,3,30,1,32,1,32,1,32,1,65,3,30,1,65,4,62,4,29,1,
65,4,62,4,62,5,61,5,61,5,28,1,32,1,65,4,29,1,32,1,32,1,32,1,32,1,32,1,65,4,62,5,61,5,61,5,28,1,32,1,32,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,
32,1,65,4,29,1,32,1,32,1,32,1,32,1,32,1,1144,62,135,5,61,5,28,1,32,1,32,1,65,4,29,1,32,1,32,1,32,1,65,4,
29,1,65,4,62,5,28,1,65,5,61,5,61,6,60,6,60,6,27,1,32,1,65,4,29,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,65,5,28,1,32,1,32,1,65,5,61,6,27,1,32,1,32,1,65,5,28,1,65,5,
28,1,65,5,28,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,65,5,28,1,65,5,28,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,65,5,61,6,27,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,
32,1,32,1,32,1,32,1,32,1,32,1,32,1,32,1,65,5,28,1,65,5,61,6,27,1,32,1,65,5,61,6,3799

OFF:
sendir,1:3,1,38000,1,419,131,66,16,49,16,16,16,16,16,16,16,49,16,16,16,16,16,16,16,16,16,49,16,16,16,49,16,
49,16,16,16,49,16,49,16,49,16,49,16,49,16,16,16,16,16,49,16,16,16,16,16,16,16,16,16,16,16,16,16,49,16,49,16,
49,16,49,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,49,16,16,16,16,16,16,16,16,16,16,16,16,16,1129,131,66,
16,49,16,16,16,16,16,16,16,49,16,16,16,16,16,16,16,16,16,49,16,16,16,49,16,49,16,16,16,49,16,49,16,49,16,49,
16,49,16,16,16,16,16,49,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,15,16,16,16,16,16,15,16,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,49,16,49,16,16,16,16,16,16,16,49,16,16,16,49,16,16,16,49,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,49,16,16,16,49,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
16,49,16,49,16,16,1,402,7,16,16,16,16,16,16,16,16,16,16,49,16,49,16,16,16,16,16,49,16,49,16,3799
Top
Barf
Expert
Posts: 1522
Joined: Fri Oct 24, 2008 1:54 pm
Location: Munich, Germany
Contact:
Contact Barf

Post by Barf »

Sorry, there is just too much in that statement (too many steps where some goes wrong) to be able to systematically find the problem. What exactly did you do to capture signals, and to send signals?

First of all, to me it appears that you are trying a hardware/software combination that is new for you, and without prior experience, you are trying it on some of the hairiest signals known to us. May I suggest that you try first to capture/send some "standard" signals first? Almost surely you have something controlled by NEC1/RC5/Sony...-signals, TV...

Still working on the problem from yesterday, ...
Top
marcoshemann
Posts: 4
Joined: Wed Feb 19, 2014 12:47 pm

Temperature Codes Daikin

Post by marcoshemann »

Hi kevincanon
I use this codes that you sent to list.
ITs work well, but don't in AUTO mode, only do cool mode.
What I need change do work in AUTO mode.
If possible send to my more information about this IR Code Daikin, I need solve this problem.
Regards,
Top
marcoshemann
Posts: 4
Joined: Wed Feb 19, 2014 12:47 pm

Hi kevincanon

Post by marcoshemann »

I have generate a HEX that control DAIKIN like
11 DA 27 F0 00 00 00 20 11 DA 27 00 00 41 1E 00 B0 00 00 00 00 00 00 C0 00 00 E3
27 caracter.
How I convert this code to Pronto Code like you sent to me?

Regards,
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

I have built an upgrade for the Daikin, if anyone would like to test it.

This zip contains all the files that I used to build this:
https://www.hifi-remote.com/forums/dload ... e_id=26054

Here is just the RMDU file:
https://www.hifi-remote.com/forums/dload ... e_id=26058
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
Post Reply

Return to “JP1 - Protocol Decodes”