JP1 Remotes

Forum for JP1 remotes
https://www.hifi-remote.com/forums/

"Failed to open JP1.x interface" w/DIY cable

https://www.hifi-remote.com/forums/viewtopic.php?t=6950

Page 4 of 8

Posted: Wed Sep 20, 2006 9:50 am
by gfb107
I've just uploaded a new debug version of tester, like the one described here, but this one only uses one stop bit.

Posted: Wed Sep 20, 2006 10:03 am
by The Robman
prelude wrote:BTW, this is the modified cable.
Do you get the same results with one of your regular cables?

Posted: Wed Sep 20, 2006 10:23 am
by prelude
The Robman wrote:
prelude wrote:BTW, this is the modified cable.
Do you get the same results with one of your regular cables?
good question. I will try it with the JP1.2 cable (not jp1.x) toight when I get back home. using the updated tester (one stop bit） and original tester.

Posted: Wed Sep 20, 2006 10:44 am
by e.axel
Why don't the results of the "new" tester program stay on the screen? It runs, flashes and disappears.

Posted: Wed Sep 20, 2006 11:09 am
by gfb107
Are you still launching tester.bat, or are you launching tester.exe directly?

Posted: Wed Sep 20, 2006 11:26 am
by prelude
e.axel wrote:Why don't the results of the "new" tester program stay on
the screen? It runs, flashes and disappears.
tester.bat has a 'pause' command, so run tester.bat not .exe. type exact tester.bat not tester or tester.exe

Posted: Wed Sep 20, 2006 11:59 am
by e.axel
Thank you.

Posted: Wed Sep 20, 2006 8:23 pm
by prelude
Maybe my serial port is bad?

Posted: Wed Sep 20, 2006 8:24 pm
by prelude
JP1.2 interface w/o connecting the remote. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:25 pm
by prelude
JP1.2 interface with the remote connected. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:26 pm
by prelude
JP1.x (no modification) interface w/o connecting the remote. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:27 pm
by prelude
JP1.x (no modification) interface with remote connected. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:27 pm
by prelude
JP1.x modified interface w/o connecting the remote. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:28 pm
by prelude
JP1.x modified interface with remote connected. (tester.exe is the original, 1tester.exe is the one bit debug mode)

Code: Select all


C:\jp1.x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . . 

C:\jp1.x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
Got 00 instead of an ACK!
JP1.2 remote found!
C:\jp1.x.test>pause
Press any key to continue . . .

Posted: Wed Sep 20, 2006 8:32 pm
by prelude
This is the working desktop. using jp1.x modified interface and remote is connected:

Code: Select all


E:\diy\jp1x.test>tester.exe
tester version 0.00
jp12io.dll version 0.00
Parsing command list file tester.dat
Opened COM1
JP1.2 remote found!
E:\diy\jp1x.test>pause
Press any key to continue . . . 

E:\diy\jp1x.test>1tester.exe
tester version 0.01
jp12io.dll version 0.00
Parsing command list file tester.dat
Openning COM1
DCB paramaters:
  DCBlength=28
  BaudRate=38400
  fBinary=1
  fParity=0
  fOutxCtsFlow=0
  fOutxDsrFlow=0
  fDtrControl=1
  fDsrSensitivity=0
  fTXContinueOnXoff=0
  fOutX=0
  fInX=0
  fErrorChar=0
  fNull=0
  fRtsControl=1
  fAbortOnError=0
  fDummy2=0
  wReserved=0
  XonLim=2048
  XoffLim=512
  ByteSize=8
  Parity=0
  StopBits=0
  XonChar=17
  XoffChar=19
  ErrorChar=0
  EofChar=0
  EvtChar=0
  wReserved1=0
JP1.2 remote found!
E:\diy\jp1x.test>pause
Press any key to continue . . .
All times are UTC-06:00
Page 4 of 8

Powered by phpBB® Forum Software © phpBB Limited