JP1 Remotes

Here's my attempt at an HCS08 executor:

Upgrade protocol 0 = 01 1A (HCS08) NEC 4Dev Gap Helper (PB v4.02)
20 17 22 47 82 CF 44 08 08 01 17 01 1A 01 17 03
4D D2 F0 11 93 08 CA 08 C9 B6 69 B7 56 A4 C0 62
44 97 8C 9E CE 60 35 60 6E 02 A9 B6 68 B7 62 43
B7 63 03 56 04 A8 01 B7 63 07 56 05 CD FF 8F 25
0A 08 56 0C 00 56 04 14 A3 16 A3 10 A3 CC FF 5C
55 7A 35 76 00 56 ED CD FF 5C 6E C1 A2 33 60 6E
01 6A 20 E7
End

You're two for two, Rob. Loaded this protocol into a 10820N, and all functions work. Thanks again!

Great, thanks for testing it. Please update your upgrade to include all the discretes that work on your unit and load it into the file section (then post a link here, so people can find it).

I have submitted a software update request here.

If KM and RM get updated to handle this, I will update your upgrade file to use the standard 4Dev protocol.

Here's the upgrade:

https://www.hifi-remote.com/forums/dload ... le_id=8768

If it's discretes you want, well, let me tell you! How about DSP mode discretes? Bi-directional input toggles. Sleep discretes. How about volume presets? Mute on and mute off. How about programmable volume presets? How about SIX programmable volume presets?