JP1 Remotes

Are you not aware there are Custom buttons available if you tap the Menu button on the top of the virtual remote and select Custom from the drop down menu ?

I needed you do that and find out if the Custom 10 button, which I had mapped to 'Options' actually pulled up the Menu.

But from what you say, you are using Remotemaster yourself ? If so the reason the Exit button is not working is that you have a very out-of-date set of RDF files files.

Yes, custom 10 works- it displays menu:) so if you can add it to bin/rmdu file and exchange GUIDE and INFO button I will be intebted.
PS. is it also possible to add VOL+/- button? vol+ has 50 and vol- has 28 code

Good OK, updated file should have Menu. Guide & Info working as you wish. I have mapped Vol+/- onto the Page+/- buttons, Put 'Options' onto the White button and 'List' onto the Enter key.

Still at: https://www.hifi-remote.com/forums/dload ... le_id=7976

OK now ?

Thanks a lot! almost everythnig works;) vol+/- don't work but it's really just a details.

I must admit the codes did seem a bit odd. Maybe that isn't the OBC but something else. But as you say it's really irrelevant as you can use the Slingplayer volume controls.

I'll upload the finished article to the forum file section.

Cheers

Al