Page 2 of 2

Posted: Tue Aug 15, 2006 7:24 pm
by The Robman
I think this is the file in question...
https://www.hifi-remote.com/forums/dload ... le_id=3481

Posted: Tue Aug 15, 2006 11:47 pm
by Capn Trips
Scott12 wrote:
Capn Trips wrote:Incorporating the comments above, I came up with THIS IR file. I encourage you to create your own, since that will provide greater learning and understanding, but try this one on for size.
That link is taking me to an old Device Upgrade file... I scanned thru the Dianosis Area files and didn't see one that looked like yours.

In the meantime, I'll see how far I can get..
https://www.hifi-remote.com/forums/dload ... le_id=3481Sorry.

Posted: Wed Aug 16, 2006 6:28 pm
by Scott12
OK, I'm really close now, stuff is working :D.. I like the LKP stuff you added in, tho I switched the LKP around so Short turns everything on & Long just selects the device. Seems like non-regular users would be more likely to not screw that up..

One more question, can I use a DKP & LKP for the same button?
So for the POWER:
SKP = Turn OFF all devices currently on (and update ToadTogs)
LKP = Turn OFF the active device (and update the ToadTog)
DKP = Send power signal w/o updating the ToadTog (basically to resolve a device getting out of sinc w/ ToadTog)

If so, do I put the same commands in the Single/Short side of the DKP & LKP or do I only put something in one?

Thanks again for all your help. This would've taken me weeks to muddle thru on my own!

Posted: Wed Aug 16, 2006 8:58 pm
by ElizabethD
Scott12 wrote: One more question, can I use a DKP & LKP for the same button?
So for the POWER:
SKP = Turn OFF all devices currently on (and update ToadTogs)
LKP = Turn OFF the active device (and update the ToadTog)
DKP = Send power signal w/o updating the ToadTog (basically to resolve a device getting out of sinc w/ ToadTog)
In theory, and perhaps in practice, it's possible. Read this:
https://www.hifi-remote.com/forums/viewtopic.php?t=2901

I wish I had something like that, tried a similar idea (using 6131) and got nowhere:
https://www.hifi-remote.com/forums/viewtopic.php?t=6157

Perhaps it'll work for you. Please try, then publish. There's got to be a way to do this but I can't think of any and began to believe that there might be theoretical limitations.

Posted: Tue Aug 29, 2006 2:49 pm
by Scott12
Sorry I never got back to trying the LKP / DKP combo. I might mess w/ that at some point in the future but I've been pretty busy. I've gotta get my a remote programmed for my dad this week, so that'll take precedence over experimentation that from the sound of it won't go anywhere anyway. :wink: