JP1 Remotes

The Robman wrote:Are you going to fix the files Vicky?

Yes I will. I've been crazy busy lately. I need to have quiet time where I can check and double check my work. i don't want to screw anything up!!

Okay, these Lasko upgrades were reviewed, the PB file and the file that uses Nec1 were not changed. The others had the initial branch changed so it doesn't jump into the data.

Remote Master :
Lasko column fan (Hmm this one was configured for a JP1.2 remote, downloaded 102 times no problems reported
https://www.hifi-remote.com/forums/dload ... e_id=11049

Keymaster Files
Lasko 5132 Heater
https://www.hifi-remote.com/forums/dload ... le_id=6983

Lasko_3440_fan (uses Nec1 , no change)
https://www.hifi-remote.com/forums/dload ... le_id=4100

Lasko Colunn Fan
https://www.hifi-remote.com/forums/dload ... ile_id=238

Protocol Builder files:
Lasko column fan - no change required
https://www.hifi-remote.com/forums/dload ... le_id=4087

Thanks a lot for your help, it works perfect for my Samurai (Colombia imported Chinese no brand) Vertical Fan just add the "Function" button and all the remote is functional now.

The learning function Keeps interpreting as a F12 but doesn't work, this new protocol work like a charm.

If you had to add the Function button to complete the upgrade, could you load your upgrade please.

Hi, already posted:
https://www.hifi-remote.com/forums/dload ... e_id=26197

Giving the proper recognition to original fellow.

Perfect, thank you

I have a OARUSB04G 4000 remote, which appears to have an incompatible processor (MAXQ610 series) with the Lasko upgrades in the files section. The learned signals work fine on the remote, just can't make a device upgrade as it maps to "F12" protocol that doesn't control the fan.

The learned signals have been posted here: https://www.hifi-remote.com/forums/dload ... e_id=26718

Could the protocol update be added for the MSXQ610 processor?

I'll work on it this weekend.

I used RMIR 2.14.18 and the decode was F12x. Using 2.13.6 gave a decode of F12. So I suspect your version of RMIR is more than a year old. See https://www.hifi-remote.com/forums/viewt ... p?t=102988 from February 2022 when F12x was added to RMIR.

Anyway, the problem is likely not a missing executor for the MaxQ processors. F12x is sent by PID 016D, and a MaxQ version is included in Protocols.ini.

Converting to a device upgrade will probably work, but your learned signals aren't exactly F12x. F12x sends, as usual, device, subdevice, and OBC data repeatedly, but the very last repeat uses a different OBC value. This OBC2 is the same for all the functions. At present, a F12x upgrade will use a value of 0 for OBC2. I suppose (hope) that your fan will ignore this last burst when you release the button.

If the upgrade you make using a newer version of RMIR doesn't work, I'll have one more thing for you to try. If necessary, I'll make a custom executor to match your learned signals exactly.

3FG wrote:I used RMIR 2.14.18 and the decode was F12x. Using 2.13.6 gave a decode of F12. So I suspect your version of RMIR is more than a year old. See https://www.hifi-remote.com/forums/viewt ... p?t=102988 from February 2022 when F12x was added to RMIR.

It's also possible that he has the "IR Decoder" set to "DecodeIR". I have RMIR 2.14.18 also and when I first opened the file, I got no protocol decoded, then I switched the IR decoder to IrpTransmogrifier and got the F12x decodes.

I have created an upgrade using F12x using the learns posted above:
https://www.hifi-remote.com/forums/dload ... e_id=26719

Yeah, I lost an earlier version of my post that recommended checking for the correct decoder.

Note that the F12x protocol executor doesn't send the exact IR signal as the learns, so we still need verification if the upgrade actually works for the Lasco fan.

Sorry for the run around guys, I was using Remote Master V2.11. Updated to V2.14.18 and everything worked fine converting the learned signals to the device upgrade.

Robman your upgrade worked also.

I did try the two different decoders before I posted initially, but with the old remote master version it made no difference.