JP1 Remotes

The Robman wrote:Regarding question #3, you are assuming that the information for the missing buttons is contained in your IR file, which is not true.

No, that was is a miscommunication. I was intending to get the "working" sound system functions (volume & mute) from the IR file, so I could add them to the Toshiba DVD upgrade and put this combination in the Comcast AUX. Later when the the unknown Sony input/source functions became available I would add them to this same upgrade. But, I no longer need to do that because . . .

Your suggestion of putting the Sony code for volume and mute in the hidden dev3 button and pointing the VPT to it, worked. So, this let me use AUX for the DVD. Assuming there was no use/need for the original dev3 code, I now have everything working the way I want except for the original objective -- the three Sony input/source functions.

tennessee titan wrote:Maybe I missed it somewhere, but no one has told Jim that to use the fourth device (dev3), you push SETUP, then AUX, and you are controlling the 4th device.

Pressing SETUP then AUX would execute whatever function has been assigned to shift-AUX, so unless he programs a macro to the shifted AUX button, it won't select DEV3. Unless there's some special functionality in the 1067 that I don't know about.

Thayt is the way my 1067BC3 works. I programmed a fourth device to dev3, and do a shift/dev 3 to control it

I'm betting that if you look in the macros tab in IR you will find a macro assigned to shift-AUX where the only step in it is dev3.

Noooooo......


Get in here Vicki. You know this remote!

Must be a hidden feature that I didn't know about then.

Your Sony upgrade works like you said, including the discrete power on & off.

I have to assign the audio system to the invisible dev3 position so I don't have direct access to the buttons/functions. So, what I hoped to do was add the following functions to the Toshiba D-R400 DVD-R.rmdu upgrade.

DVD, TV & SAT to #1, 2 & 3 in that order.

Assign the INPUT +/- to the Channel +/- like you have it in the "Sony HTCT100 (Sound Bar w/Sub-Woofer)" upgrade.

I can then assign this combined DVD/Sony INPUT upgrade to the Comcast AUX button and have everything I need.

As I don't have your current IR file, I took your old one and added both the Sony and Toshiba to it. Then I programmed keymoves to program the 1,2,3,CH+ and CH- buttons in AUX mode as you requested.

I also programmed a macro to the "A" button which basically converts it into a "dev3" device button, so you can use it if you ever need more complete control over the Sony. However, thinking that you might need the A button to serve it's normal purpose in CBL mode, I programmed a keymove to override the macro in CBL mode.

Here's the IR file, try it out...

https://www.hifi-remote.com/forums/dload ... le_id=6113

It seems to do everything I want (and more). Thank you so much for all your help.