Posted: Thu Oct 30, 2008 11:03 am
yes my jp1.x cable arrived today. i bought it last friday from diygadget.
[/img]
Page 2 of 7
Posted: Thu Oct 30, 2008 12:51 pm
when i open RM and then open your upgrade file and choose my dreambox v4 remote i get 4 error messages like this
[/img]
[/img]
Posted: Sat Nov 01, 2008 11:06 am
nobody? i don´t know what to do now.
Posted: Sat Nov 01, 2008 3:50 pm
I have updated the KM file so that you will be able to switch to the Dreambox remote in RM, but I have no idea whether the resulting upgrade will work or not as I've never written an HCS08 protocol before.
If one of the HCS08 experts is reading this, can you check over my PB file please...
https://www.hifi-remote.com/forums/dload ... le_id=5910
If one of the HCS08 experts is reading this, can you check over my PB file please...
https://www.hifi-remote.com/forums/dload ... le_id=5910
Posted: Sat Nov 01, 2008 6:19 pm
Rob, your PB file did not contain an HCS08 version of this protocol. However, I grabbed the copy out of the KM file, and it looks like you got it almost correct, but somehow some bytes at the end got scrambled around. Anyway, I've updated your PB file with a corrected HCS08 version.
Change the one in the KM notes area to:Obviously, I don't know if this works or not, but it should do the same as the S3C8 version.
Change the one in the KM notes area to:
Code: Select all
Upgrade protocol 0 = 01 FF (HCS08) TVIX 5000 (PB v4.01)
20 15 23 47 11 CD 4D 08 08 01 21 03 45 01 21 01
1A D4 FD 11 A7 08 CB 3F 62 3F 63 6E 03 AA CC FF
5F
EndPosted: Sat Nov 01, 2008 8:50 pm
Thanks Mike, I have updated the KM file.
There appears to be a bug in the way PB generates HCS08 code. If you click "Load Generated Code" using this PB file, you'll get the following code:
whereas it should have looked like this...
There appears to be a bug in the way PB generates HCS08 code. If you click "Load Generated Code" using this PB file, you'll get the following code:
Code: Select all
0100 20 12 BRA L0114
...
0113 11 DB $11 ;pd0C:
0114 A7 08 L0114: AIS #$08
0116 CB CC FF ADD $CCFF
0119 5F CLRX Code: Select all
0100 20 15 BRA L0117
...
0113 11 A7 DW $11A7 ;pd0C/0D: Leadin on=9038 uS
0115 08 CB DW $08CB ;pd0E/0F: Leadin off=4502 uS
0117 CC FF 5F L0117: JMP XMITIRPosted: Sat Nov 01, 2008 11:42 pm
There is a bug in the code generator for the HCS08 which causes that first branch offset to be off by three bytes. I know several people found this a while back, and I've already got it fixed in the next version, which hopefully I can release before too much longer.
Posted: Sun Nov 02, 2008 4:34 am
thx,
robman, i took your updated file ..id=5910
but when i open this file in RM an "import failure" appears which says "the upgrade you are trying to import is not valid! it does not contain a value for remote.name"
when i click ok, nothing was loaded!
robman, i took your updated file ..id=5910
but when i open this file in RM an "import failure" appears which says "the upgrade you are trying to import is not valid! it does not contain a value for remote.name"
when i click ok, nothing was loaded!
Posted: Sun Nov 02, 2008 9:51 am
5910 is a protocol builder file, this was posted for Mike, you were not supposed to use it. You were supposed to use the KM file that I posted.
I created an RM version for you...
https://www.hifi-remote.com/forums/dload ... le_id=5912
I created an RM version for you...
https://www.hifi-remote.com/forums/dload ... le_id=5912
Posted: Sun Nov 02, 2008 11:43 am
yippie yah yeah,
you are great! it seems to have folded so far everything.
now it comes the finetuning.
from the dreambox support website i have the code for my tv. 0196 that i only entered in my remote.
how can i change the button layout for this device?
thanks, thanks, thanks
friday
you are great! it seems to have folded so far everything.
now it comes the finetuning.
from the dreambox support website i have the code for my tv. 0196 that i only entered in my remote.
how can i change the button layout for this device?
thanks, thanks, thanks
friday
Posted: Sun Nov 02, 2008 12:25 pm
That's a new subject so please start a new thread, and include as much info as possible (TV brand, model no, etc).friday wrote:from the dreambox support website i have the code for my tv. 0196 that i only entered in my remote.
how can i change the button layout for this device?
Posted: Sat Dec 27, 2008 11:42 am
one question,
how can i slow down the signals from the upgrade you made?
all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 or 3times down.
but only in this upgrade. all other upgrades/settings/keymoves are ok
how can i slow down the signals from the upgrade you made?
all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 or 3times down.
but only in this upgrade. all other upgrades/settings/keymoves are ok
Posted: Sat Dec 27, 2008 1:55 pm
That probably means that the leadout time is too short, so the executor would need to be fixed in PB. I don't have time to do it myself, so either give it a try yourself or see if someone else can jump in. If this is for a HCS08 remote, be aware of the bug in PB as I don't think Mike has released the fixed version yet.
Posted: Thu Jan 15, 2009 5:56 pm
i have the same trouble with this
all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 times down. or 2 times up !
Please help
all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 times down. or 2 times up !
Please help
Posted: Mon Mar 09, 2009 4:53 am
can anyone help with this problem. anyone who knows to fix the leadout time?