I want to create an upgrade file in Remote Master for a new device I have but annoyingly do not have the remote for.
These are the IR codes given but I have no idea how to get them in to Remote Master. I believe these might be NEC codes?
Any pointers? Would be happy to share the upgrade file If I can get it working of course.
Thanks, RJ.
Code: Select all
; # Standard remote
address = 0xfe01
command_menu = 0xee11
command_ok = 0xec13
command_cancel = 0xe619
command_cancel = 0xb34c
command_up = 0xe916
command_down = 0xe51a
command_left = 0xae51
command_right = 0xaf50
command_minus = 0xef10
command_plus = 0xe718
command_setup = 0xbc43
command_app = 0xf00f
command_res_reset = 0xbd42
command_power = 0xbf40
command_ovrscn_c = 0xfb04
command_mute = 0xbe41