JP1 Remotes

Hello,

I must open a urc8308 remote control, similar to urc8305.

Here is how I have done.

1. Unscew the battery cover.
2. You need to remove with force and courage the black plastic on the bottom where URC 8308 and CE are printed.
3. Remove 2 screws located at the far sides of right and left ...

Hello,

unclemiltie wrote:make sure that you have the "force > 2K" (or whatever it is) in the IR tab. The EEPROMS in this remote are a bit touchy and some of them IR can't figure out what size they are and then the data is off a bit.

Thanks.

Yesok

Hello,

I see the signature mismatch warning when I upload same IR file twice, AFTER activating my URC-9960B01(with 4K EEPROM). But the warning does not appear when I upload the same IR file BEFORE activating. All codes(mostly DSM and LKP) are running as expected. I have the same warning for Ver 1 ...

Hello Kiwin,

Thanks for your reply.

Some people have reported it is mapped to "Setup".

MENU (jp1 kiwin)---> Setup (RemoteMaster buttons tab)

With Menu button mapped to Setup in RM, Menu button on SlingBox remote is working fine.

it would be better if sling posted how to make just a remote ...

Hello All,

Does anybody know of a remote or device with UEI-PL chip inside, other than Slingbox?

Yesok

Hello Kiwin,

Thanks for your reply.

In RM, I mapped:
Blue (kiwin skin)--> custom01 (kiwin buttons )--> PIP (RM button)
Red (kiwin skin)--> custom02 (kiwin buttons )--> PIP-Format (RM button)
Green (kiwin skin)--> custom03 (kiwin buttons )--> PIP Freeze (RM button)
Yellow (kiwin skin)--> custom04 ...

Hello Kiwin,

This skin adds Buttons on the SlingPlayer Remote that map to the Custom entries that JP1 creates when the “circle” buttons are used. Without this skin, the “custom” functions only appeared in the remote menu under “Custom”.

Thanks for your skin.
I have managed to apply it to my ...

Hello Robman,

Thanks for your reply.
I hope yor are now fully recovered from the damages of flood.

They have different sets of codes pre-loaded as they are designed for different markets. PL is the updated version of JU and is designed for the US market.

Do you think that they are the same in ...

Hello All,

Could someone tell me the differences between those chips?

Yesok

Hello Binky,
I fixed my problem by doing Tools->Add-Ins->Analysis Toolpak and loading in the Toolpak for functions such as HEX2DEC(). Now, I don't see the #NAME? in the cells anymore on startup or when loading this PB file.

I did the same and have same result as you with Korean Excel and Korean ...

Hello Binky.

I believe the issue is that the Assembly Tabsheet doesn't have any S3C8 assembly code to include but I'm not really sure. .
Is this normal?
Is the generation of S3C8 assembly code automatic?

I also am seeing #NAME? sprinkled in various cells with this PB file.
You have same result ...

Hello Robman,

The Robman wrote:It opens fine for me using PB 4.0, but I did notice that the line breaks were corrupted in the file, so I fixed that.

Do you mean you have proper upgrade codes displayed in the upper right corner of PB?
If yes, could you send me the upgrade code?

Yesok

Hello,

Could someone confirm that this PB file(see https://www.hifi-remote.com/forums/dload.php?action=file&file_id=1398) is working file?

Under Korean and Spanish version of MS Excel 2003, PB 4.0 and 3.12 shows on the upper right corner rows of #NAME?. It is the same whether Use Assembled ...

Hello Capn Trips,

Capn Trips wrote:The old Yahoo JP1 group file section has a link to PB 3.12.

http://www.hifi-remote.com/files/tools/ ... r-v312.zip

Thanks.

Yesok

Hello,

Could someone tell me where to download PB3.x?
I need this to test with my Korean version of MS Excel 2003 which behaves not as expected, such as failure to save protocol files and failure to display upgrade codes on PB4.0.

Yesok