JP1 Remotes

at Binky

It does not work. I have the IR file uploaded here:
https://www.hifi-remote.com/forums/dload ... le_id=8325
maybe you can look again if I did everything right.

Thanks

Kirk

I've uploaded two IR files here: https://www.hifi-remote.com/forums/dload.php?action=file&file_id=8315. The 2nd file is the download from the remote after delete the 01FA Protocol and the TV:1107 Device. Apparently is the Patch for Setup Table not written in the RAM (I have pressed TV Button and Ch ...

Binky, thank you for your reply

I have the procedure performed as described, but it does not work.
Strangely, the TV device button changes from TV/1107 after Upload to Remote to TV/0556. I also miss for the Upgrade Protocol 01FE a Device Upgrade in the Device tab of IR. Or i see that wrong?

Kirk

it is a JP1.2 European Remote similar or equal to a URC-7555 but which apparently also European.

hanks for the reply Liz

I have a few days before the file section and the board searched but nothing useful found.
The only thing that I have found are three topics with Device Multiplexer Protocols for HCS08 Processor but not for a URC-7556/7555 Remote

https://www.hifi-remote.com/forums/viewtopic ...

I have a URC-7556 remote (Signature 10751075, HCS08 Processor) and would like this program with some Special Protocols, such as
DeviceMultiplexer and LKP / DKP.

Unfortunately, I can not find for this remote any device upgrade codes and extenders are not available. Remote Master and Special ...

Done!

I used the Panasonic Combo Upgrade Protocol:

Upgrade protocol 0 = 00 cd (S3C80) Panasonic Combo
45 91 32 8b 12 8f 45 08 08 00 da 00 c6 00 da 02
7b 90 c9 06 d0 03 54 e4 05 08 b4 06 08 b4 07 08
20 11 8d 01 33
End

and inserted the followed bytes: E6 0D 05 to this:

Upgrade protocol 0 = 00 ...

Hi,

My Panasonic TV need a command to power on for 2 secs with a single
press. When I create a macro for turning on my system (Dreambox 7000,
Yamaha RXV-795 and Panasonic TX29-AT1) the TV doesn't turn on, because the power on command is to briefly.
I'm using the "Panasonic_TX-21AT1_TV.txt" Device ...